Showing 1021-1032 of 1,814 results
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Fender washers sized 3/8 x 1-1/4 inch. They are made of Type 316 stainless steel. The sheet identifies them as fender washers supplied in a jar.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a fender washer with a 3/8 inch inside diameter and 2 inch outside diameter. It is made of 18-8 stainless steel with a stainless finish. The washer has a thickness of 0.047 inch to 0.080 inch and is used where an extra wide bearing surface is required.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A flat cut washer for use around a bolt or screw between the fastener and the attached part. It is made of 316 stainless steel with no additional finish. The washer fits #10 bolt sizes and has a thickness of 0.065 in, an outside diameter of 0.515 in, and an inside diameter of 0.227 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Fender washer with an extra wide bearing surface for use where a wide load distribution area is required. It is made of 316 stainless steel with a stainless finish. The washer has a 1/4" inside diameter, 1-1/4" outside diameter, and thickness of 0.047"–0.080".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A Type 18-8 Belleville washer sized for 1/4 in bolts. It is made of 18-8 stainless steel with a plain finish. The washer has an inside diameter of 0.263 in, an outside diameter of 0.500 in, and a thickness of 0.030 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A flat cut washer for use around a bolt or screw between the fastener bearing surface and the attached part. It is made of 316 stainless steel with a stainless finish. The washer fits 5/16 bolt sizes and has a 0.080 in thickness, 0.703 in outside diameter, and 0.359 in inside diameter.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A 5/16 x 1-1/2 inch fender washer made from Type 316 stainless steel. It is supplied in a jar. The sheet identifies it as catalog number 70740SS316J.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A split lock washer made of stainless steel with a stainless finish. It has a thickness of 0.062 in, an outside diameter of 0.487 in, and an inside diameter of 0.260 in. The washer is silver in color and has Rockwell hardness C35-43.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A #14 finish cup washer made of 18-8 stainless steel. It is supplied in a jar. The sheet identifies it as a cup washer for general fastening use.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a fender washer made from Type 316 stainless steel. It is sized 3/8 in inner diameter by 1-1/2 in outer diameter. The washer is intended for use where a wide bearing surface is needed.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A coiled, hardened, split circular lock washer with a slightly trapezoidal wire section. It is made of 316 stainless steel with a stainless finish. The washer has a thickness of 0.047 in, an outside diameter of 0.334 in, and an inside diameter of 0.200 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 1021-1032 of 1,814 results