Showing 805-816 of 1,814 results
This is a fender washer made of 18-8 stainless steel with a plain finish. It has an inside diameter of 0.531 in and an outside diameter of 2.000 in. The washer is used where a larger bearing surface is needed.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Bonded sealing washer for use where water needs to be kept from seeping into the fastener or fastener hole. It is made of steel with a galvanized finish and has an EPDM seal material. The washer is silver in color and has an outside diameter of 0.980" and an inside diameter of 0.918".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Belleville washers for 5/16" bolt sizes. Made of spring steel with a zinc plated finish. The washer has an inside diameter of 0.322" and an outside diameter of 1.063". Thickness is 0.082".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A 5/16" split lock washer with a medium profile. It is made of silicon bronze with a bronze color finish. The washer has an outside diameter of 0.583", an inside diameter of 0.322", and a thickness of 0.078". It is designed to resist loosening caused by vibration and corrosion and to provide a hardened bearing surface for more uniform torque control and load distribution.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a #12 bonded sealing washer with a rubberized underside for forming a water-tight seal around the fastener and fastener hole. It is made of steel with a galvanized finish and EPDM seal material. The washer measures 0.803" thick, with an outside diameter of 0.980" and an inside diameter of 0.918". It is silver in color.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a #6 internal locking washer. It is made of steel and has a zinc plated finish. The sheet identifies it as an internal tooth lockwasher in jar packaging.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a flat cut washer for use around a bolt or screw, between the bearing surface of the fastener and the part it is attached to. It is made of brass with a copper color finish. The washer has a thickness of 0.054 inch, an inside diameter of 0.286 inch, and an outside diameter of 0.625 inch.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A finish cup washer designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. The washer is made of brass and has a copper color. Outside diameter is 0.447" and inside diameter is 0.181".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Split lock washer for #12 fasteners. It is made of silicon bronze with a bronze color finish. The washer has an inside diameter of 0.227", a thickness of 0.056", and an outside diameter of 0.377".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Fender washer with an extra wide bearing surface. It is made of steel with a zinc plated finish. The washer has a 1/4" inside diameter, 1" outside diameter, and thickness of 0.047"–0.080".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a 5/8 inch flat cut washer sold in a jar. It is made of silicon bronze. The sheet identifies it as a flat washer product for general fastening use.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A 1/4 SAE flat washer made from low carbon steel. It has a zinc-plated finish. The sheet identifies it as a flat washer supplied in box quantity.
Contact for Pricing
Minimum Qty: 11100
Multiplier: 11100
*Contact for lower quantities*
Showing 805-816 of 1,814 results