Showing 781-792 of 1,814 results
Flat cut washer for use around a bolt or screw to improve stress distribution and span large clearance holes. Made of steel with a zinc plated finish. It has a thickness of 0.145", an outside diameter of 1.500", and an inside diameter of 0.813" for 3/4" bolt sizes.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A bonded sealing washer for use where water needs to be kept from seeping into the fastener or fastener hole. It is made of steel with a galvanized finish and has an EPDM seal material. The washer measures 0.803 in thick, with an outside diameter of 0.923 in and an inside diameter of 0.909 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A hardened circular washer with twisted prongs or teeth extending from the outer edge. It is made of steel with a zinc plated finish. The fastener size is #6.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A coiled, hardened split circular lockwasher with a slightly trapezoidal wire section. It is made of steel with a zinc plated finish. The washer has a thickness of 0.062 in, an outside diameter of 0.487 in, and an inside diameter of 0.260 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A hardened circular washer with twisted prongs or teeth extending from the outer edge. It is an external locking washer made of steel with a zinc plated finish. The fastener size is #8.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A hardened circular washer with twisted prongs or teeth that extend inward from the inside edge of the washer. It is made of steel with a zinc plated finish. The fastener size is #8.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A flat cut washer for use around a bolt or screw between the fastener and the attached part. It is made of steel with a zinc plated finish. The washer has a thickness of 0.065 in, an outside diameter of 0.453 in, and an inside diameter of 0.196 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A fender washer with an octagonal shape and significantly more surface area than a USS or SAE washer. It is made of steel with a zinc plated finish. The washer has an inside diameter of 1/4 in and an outside diameter of 1-3/8 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a fender washer with a 1/2 inch inside diameter and 2 inch outside diameter. It is made of steel with a zinc plated finish. The washer is used where an extra wide bearing surface is required, including sheet metal, plumbing, and electrical work.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A fender washer with significantly more surface area than a USS or SAE washer. It is made of steel with a zinc plated finish. The washer has a 1/8 in inside diameter, 1 in outside diameter, and thickness of 0.047 in to 0.080 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A flat cut washer for use around a bolt or screw between the fastener and the attached part. It is made of steel with a zinc-plated finish. The washer fits #10 bolt sizes and has a 0.065 in thickness, 0.515 in outside diameter, and 0.227 in inside diameter.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A flat cut washer for use around a bolt or screw between the fastener bearing surface and the attached part. It is made of steel with a zinc plated finish. The washer has a thickness of 0.080 in, an outside diameter of 0.827 in, and an inside diameter of 0.419 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 781-792 of 1,814 results