Showing 733-744 of 1,814 results
This is a flat cut washer for use around a bolt or screw, between the bearing surface of the fastener and the part it is attached to. It is made of brass with a copper color finish. The washer has a thickness of 0.054 inch, an inside diameter of 0.286 inch, and an outside diameter of 0.625 inch.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A finish cup washer designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. The washer is made of brass and has a copper color. Outside diameter is 0.447" and inside diameter is 0.181".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Split lock washer for #12 fasteners. It is made of silicon bronze with a bronze color finish. The washer has an inside diameter of 0.227", a thickness of 0.056", and an outside diameter of 0.377".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Fender washer with an extra wide bearing surface. It is made of steel with a zinc plated finish. The washer has a 1/4" inside diameter, 1" outside diameter, and thickness of 0.047"–0.080".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a 5/8 inch flat cut washer sold in a jar. It is made of silicon bronze. The sheet identifies it as a flat washer product for general fastening use.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A 1/4 SAE flat washer made from low carbon steel. It has a zinc-plated finish. The sheet identifies it as a flat washer supplied in box quantity.
Contact for Pricing
Minimum Qty: 11100
Multiplier: 11100
*Contact for lower quantities*
Flat cut washer for use around a bolt or screw to improve stress distribution and span large clearance holes. Made of steel with a zinc plated finish. It has a thickness of 0.145", an outside diameter of 1.500", and an inside diameter of 0.813" for 3/4" bolt sizes.
Contact for Pricing
Minimum Qty: 445
Multiplier: 445
*Contact for lower quantities*
This is a #10 lock washer with an external tooth design. It is zinc plated and supplied in a box. The sheet identifies it as a lock washer for general fastening applications.
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*
Flat cut washer made of steel with a zinc plated finish. It is sized for #10 bolt sizes and has an outside diameter of 0.515 inch, an inside diameter of 0.227 inch, and a thickness of 0.065 inch. Flat washers are used to improve stress distribution and to span large clearance holes.
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*
Flat cut washer for use with #6 bolts. It is made of steel with a zinc plated finish and silver color. The washer measures 0.065" thick, with a 0.164" inside diameter and 0.390" outside diameter.
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*
Belleville washers made of spring steel with a zinc plated finish. They fit 3/8" bolt sizes and have an inside diameter of 0.386" and an outside diameter of 1.063". The thickness is 0.082". The sheet lists a torque value of 17.9 ft/lbs and flat load values of 2700 to 3300.
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*
A fender washer with a 1/4 in inside diameter and 2 in outside diameter. It is made of steel with a zinc plated finish. The sheet lists a thickness range of 0.047 in to 0.080 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 733-744 of 1,814 results