Showing 1729-1740 of 1,814 results
ABB - Installation Products · ABB
H1233/8
U-Shaped Strut Washer - Kindorf, For Metallic Framing Channel, Size - 3/8 Inch, Silver-galvanized, Allowable Load Rating - 610 lbf
Contact for Pricing
Minerallac Company · Minerallac · Cully
40743HGJ
This is a fender washer with a 3/8 inch inside diameter and 1-1/4 inch outside diameter. It is made of medium carbon steel with a hot dipped galvanized finish. The washer has a thickness range of 0.047 inch to 0.080 inch.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Minerallac Company · Minerallac · Cully
40720P
Fender washer for applications requiring an extra wide bearing surface. It is made of steel with a zinc plated finish. The washer has a 1/4" inside diameter, 1" outside diameter, and thickness of 0.047"–0.080".
Contact for Pricing
Minimum Qty: 3600
Multiplier: 3600
*Contact for lower quantities*
Minerallac Company · Minerallac · Cully
40735-1000
This is a 5/16 x 1-1/4 fender washer. It is made of steel with a zinc plated finish. The washer has a 5/16" inside diameter, 1-1/4" outside diameter, and a thickness of 0.047"–0.080".
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*
Minerallac Company · Minerallac · Cully
40925BFG
Belleville washers for 1/2" bolt sizes. Made from steel-6150 with a zinc plated finish. The washer has an inside diameter of 0.515", an outside diameter of 1.188", and a nominal thickness of 0.091". Listed load and torque values include 23.2 ft/lbs torque and 3800 lbs at 100% load.
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 2500
Multiplier: 2500
*Contact for lower quantities*
Minerallac Company · Minerallac · Cully
40750HGJ
Fender washer with a 1/2" inside diameter and 1-1/2" outside diameter. Made of steel with a hot dipped galvanized finish. Thickness is listed as 0.047"–0.080". Used where an extra wide bearing surface is required, including sheet metal, plumbing, and electrical work.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 35714
Multiplier: 35714
*Contact for lower quantities*
Minerallac Company · Minerallac · Cully
40317BFG
A flat cut washer for use around a bolt or screw between the bearing surface of the fastener and the part it is attached to. It is made of steel with a Bright Finish. The washer fits #12 bolt sizes and has a thickness of 0.080 in, an outside diameter of 0.577 in, and an inside diameter of 0.265 in.
Contact for Pricing
Minimum Qty: 13330
Multiplier: 13330
*Contact for lower quantities*
Minerallac Company · Minerallac · Cully
40305BFG
A flat cut washer for use around a bolt or screw between the fastener bearing surface and the attached part. It is made of steel with a Bright Finish. The washer is sized for #6 bolts and has a 0.065 in thickness, 0.390 in outside diameter, and 0.164 in inside diameter.
Contact for Pricing
Minimum Qty: 39500
Multiplier: 39500
*Contact for lower quantities*
Minerallac Company · Minerallac · Cully
40510BFG
A coiled, hardened split circular lockwasher with a slightly trapezoidal wire section. It is made of steel with a Bright Finish and is intended to provide a hardened bearing surface for more uniform torque control and load distribution. The washer has a thickness of 0.040 in, an outside diameter of 0.293 in, and an inside diameter of 0.174 in.
Contact for Pricing
Minimum Qty: 50000
Multiplier: 50000
*Contact for lower quantities*
Showing 1729-1740 of 1,814 results