Showing 1657-1668 of 1,814 results
A #10 finish cup washer made of 18-8 stainless steel. The sheet identifies it as a cup washer in jar packaging. No dimensions or other physical specifications are printed on the sheet.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A flat cut washer for use around a bolt or screw between the fastener bearing surface and the attached part. It is made of 316 stainless steel with no additional finish. The washer is sized for #8 bolts and has a 0.065 in thickness, 0.453 in outside diameter, and 0.196 in inside diameter.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Belleville specialty washers for 3/8" bolt sizes. They are made of 18-8 stainless steel / 301 stainless steel and have a zinc plated finish. The washer has an outside diameter of 0.750", an inside diameter of 0.390", and a thickness of 0.050".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A fender washer used where an extra wide bearing surface is required. It is made of 316 stainless steel with a stainless finish. The washer has a 1/4 in inside diameter, 1 in outside diameter, and thickness of 0.047 in to 0.080 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A fender washer made from Type 316 stainless steel. It is sized 3/8 x 1-1/4 inches. The sheet lists the material as 316 stainless steel.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
7/16" lock washers with a medium split design. Made from Type 316 stainless steel. Supplied in a jar.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A split lock washer for use where increased bolt tension and resistance to loosening are needed. It is made of steel with a zinc plated finish and silver color. The washer has a thickness of 0.125", an outside diameter of 0.869", and an inside diameter of 0.512".
Contact for Pricing
Minimum Qty: 2000
Multiplier: 2000
*Contact for lower quantities*
A 1/4 x 1-1/2 inch fender washer made from Type 316 stainless steel. It is intended for general fastening applications where a wide washer bearing surface is needed. The sheet identifies the material as 316 stainless steel.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Flat cut washers used to improve stress distribution and span large clearance holes. Made of 316 stainless steel with a stainless finish. Sized for 1/4" bolts, with 0.080" thickness, 0.640" outside diameter, and 0.296" inside diameter.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
#8 lock washers, medium split, made of Type 316 stainless steel. Supplied in a jar. This sheet identifies the product as a locking washer for #8 fasteners.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A 3/4 inch flat cut washer made from 18-8 stainless steel. The sheet identifies it as a flat cut washer in a jar package. It is intended for general fastening applications where a flat washer is used.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A thin, flat, circular metal washer with a centrally located hole. It is made of 316 stainless steel with no additional finish. The washer fits #6 bolt sizes and has a 0.065 in thickness, 0.390 in outside diameter, and 0.164 in inside diameter.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 1657-1668 of 1,814 results