Showing 1621-1632 of 1,814 results
A fender washer with an extra wide bearing surface, originally designed for auto body repair work. It is made of 18-8 stainless steel. The washer has an inside diameter of .281 in, an outside diameter of 1-1/2 in, and a nominal thickness of 0.062 in (± .007).
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A fender washer with an extra wide bearing surface, originally designed for auto body repair work and also used in sheet metal, plumbing, and electrical work. It is made of 18-8 stainless steel. The washer has an inside diameter of .531 in, an outside diameter of 1-1/2 in, and a nominal thickness of 0.062 in (± .007).
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a 1/2 inch flat cut washer made of 18-8 stainless steel with a stainless finish. It is designed for assembly around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. The washer is used to improve stress distribution and span large clearance holes.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Flat cut washer for use around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. Made of 18-8 stainless steel with a silver finish. Fits 1/2 in bolt sizes and has an outside diameter of 1-1/4 in. Nominal thickness is 0.062 in (± 0.007) and inside diameter is .531 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a fender washer with an extra wide bearing surface. It is made of 18-8 stainless steel. The washer has an inside diameter of .531", an outside diameter of 1-3/8", and a nominal thickness of 0.062" (± .007).
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Flat cut washer for use around a bolt or screw, between the fastener bearing surface and the attached part. Made of 18-8 stainless steel with a silver finish. It fits 1/4 in bolt sizes and has an outside diameter of 5/8 in, inside diameter of .281 in, and nominal thickness of 0.050 in (± .007).
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Square washer sized for 3/8 in bolt sizes. It is made with an electro-galvanized finish. The washer has a thickness of 1/4 in, an outside width of 1-5/8 in, and an inside diameter of 7/16 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A 1/2 x 1-1/4 inch fender washer. It is zinc plated and supplied in a jar. The sheet identifies it as catalog number 40751J.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a 3/8-inch flat cut washer. It is made of 18-8 stainless steel. The sheet identifies it as a flat cut washer for general fastening use.
Contact for Pricing
Minimum Qty: 2500
Multiplier: 2500
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 1621-1632 of 1,814 results