This is a split lock washer. It is made of steel with a zinc plated finish and silver color. The washer has a thickness of 0.094", an outside diameter of 0.680", and an inside diameter of 0.385". It is described as medium and is intended to resist loosening caused by vibration and corrosion while providing a hardened bearing surface for more uniform torque control and load distribution.

This is a 1" USS flat washer in a jar. It is made of steel with a zinc plated finish and a silver color. The washer has a thickness of 0.171", an inside diameter of 1.062", and an outside diameter of 2.500". It fits 1" bolt sizes.

This is a fender washer with a 1/4 in inside diameter and 1-1/4 in outside diameter. It is made of steel with a zinc plated finish. The washer has a thickness of 0.047 in to 0.080 in and is used where an extra wide bearing surface is required.

Fender washer with an extra wide bearing surface. It is made of steel with a zinc plated finish. The washer has a 1/4" inside diameter, 2" outside diameter, and thickness of 0.047"–0.080".

A fender washer used where an extra wide bearing surface is required. It is made of steel with a zinc plated finish. The washer has a 5/16" inside diameter, 1-1/4" outside diameter, and thickness of 0.047"–0.080".

This is a fender washer with a 3/8" inside diameter and 1-1/2" outside diameter. It is made of steel with a zinc plated finish. The washer has a thickness of 0.047" to 0.080" and is used where an extra wide bearing surface is required.

Fender washer made of steel with a zinc plated finish. It has an inside diameter of 3/8 inch and an outside diameter of 2 inches. The thickness is listed as 0.047 inch to 0.080 inch. It is used where an extra wide bearing surface is required.

A steel fender washer with a zinc plated finish. It has a 1/2 in inside diameter, 1-1/2 in outside diameter, and 0.047 in to 0.080 in thickness. Used where an extra wide bearing surface is required, including sheet metal, plumbing, and electrical work.

This is a 3/8 inch split lock washer in medium split style. It is made of stainless steel with a stainless finish and is supplied in a jar. The washer is intended to apply greater bolt tension per unit of applied torque and to resist loosening caused by vibration and corrosion.

A fender washer with an extra wide bearing surface, originally designed for auto body repair work and also used in sheet metal, plumbing, and electrical work. It is made of 18-8 stainless steel with a stainless finish. The washer has a 1/4 in inside diameter, 1-1/4 in outside diameter, and thickness of 0.047 in to 0.080 in.

Flat cut washers used to improve stress distribution and span large clearance holes. This washer is made of 18-8 stainless steel with no additional finish and a silver color. It is sized for #8 bolts and has an outside diameter of 0.453" and an inside diameter of 0.196".

A 1/4" split lock washer in medium split style. It is made of stainless steel with a stainless finish and silver color. The washer has a thickness of 0.062", an inside diameter of 0.260", and an outside diameter of 0.487". It is intended to resist loosening caused by vibration and corrosion and to provide a hardened bearing surface for more uniform torque control and load distribution.