Showing 1489-1500 of 1,814 results
A split lock washer made of stainless steel with a stainless finish. It has a thickness of 0.078 in, an outside diameter of 0.583 in, and an inside diameter of 0.322 in. The washer is silver in color and is designed to provide a hardened bearing surface and resist loosening from vibration.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A #10 medium split lock washer supplied in a jar. It is made of Type 316 stainless steel. The sheet identifies it as a lock washer for #10 size applications.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A #8 split lock washer in medium split style. It is made of 18-8 stainless steel with a stainless finish and silver color. The washer has a thickness of 0.040 in, an inside diameter of 0.174 in, and an outside diameter of 0.293 in. It is intended to resist loosening caused by vibration and corrosion and to provide a hardened bearing surface for more uniform torque control and load distribution.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A 1/2 inch flat cut washer. Made from Type 316 stainless steel. Used as a flat washer in fastening applications.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
External tooth lock washers in #8 fastener size. Made of 18-8 stainless steel. The sheet describes this type as offering the greatest locking efficiency, with teeth on the largest radius for greater torsional resistance.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A #10 finish cup washer made of 18-8 stainless steel. The sheet identifies it as a cup washer in jar packaging. No dimensions or other physical specifications are printed on the sheet.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A flat cut washer for use around a bolt or screw between the fastener bearing surface and the attached part. It is made of 316 stainless steel with no additional finish. The washer is sized for #8 bolts and has a 0.065 in thickness, 0.453 in outside diameter, and 0.196 in inside diameter.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Belleville specialty washers for 3/8" bolt sizes. They are made of 18-8 stainless steel / 301 stainless steel and have a zinc plated finish. The washer has an outside diameter of 0.750", an inside diameter of 0.390", and a thickness of 0.050".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A fender washer used where an extra wide bearing surface is required. It is made of 316 stainless steel with a stainless finish. The washer has a 1/4 in inside diameter, 1 in outside diameter, and thickness of 0.047 in to 0.080 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A fender washer made from Type 316 stainless steel. It is sized 3/8 x 1-1/4 inches. The sheet lists the material as 316 stainless steel.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
7/16" lock washers with a medium split design. Made from Type 316 stainless steel. Supplied in a jar.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A split lock washer for use where increased bolt tension and resistance to loosening are needed. It is made of steel with a zinc plated finish and silver color. The washer has a thickness of 0.125", an outside diameter of 0.869", and an inside diameter of 0.512".
Contact for Pricing
Minimum Qty: 2000
Multiplier: 2000
*Contact for lower quantities*
Showing 1489-1500 of 1,814 results