Showing 1477-1488 of 1,814 results
This is a flat cut washer with a 5/8" size designation. It is made of brass with a copper color finish. The washer has a thickness of 0.160", an outside diameter of 1.780", and an inside diameter of 0.718".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A flat fender washer with significantly more surface area than a USS or SAE washer. It is made of steel with a zinc plated finish. The washer has an inside diameter of 3/8 in and an outside diameter of 1-3/8 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A thin, flat, circular washer with a centrally located hole. It is made of brass and has a copper color. The washer measures 0.054 in thick, 0.625 in outside diameter, and 0.286 in inside diameter.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a flat cut washer made of brass. It has an outside diameter of 1.030 in, an inside diameter of 0.453 in, and a thickness of 0.104 in. The washer is copper-colored and is used around a bolt or screw between the fastener bearing surface and the attached part.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A coiled, hardened, split circular washer with a slightly trapezoidal wire section. It is made of silicon and finished in bronze. Key dimensions are 0.078 in thickness, 0.583 in outside diameter, and 0.322 in inside diameter.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A split lock washer with a coiled, hardened, split circular form and a slightly trapezoidal wire section. It is made of silicon bronze and has a bronze color. The washer measures 0.031 in thick, 0.250 in outside diameter, and 0.148 in inside diameter.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A thin, flat, circular stamping with a centrally located hole. This flat cut washer is made of brass with a copper color finish. It has a thickness of 0.034 in, an outside diameter of 0.375 in, and an inside diameter of 0.177 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Split lock washer made of silicon bronze. It is designed to apply greater bolt tension per unit of applied torque and resist loosening caused by vibration and corrosion. The washer provides a hardened bearing surface for more uniform torque control and load distribution. Dimensions listed are 0.188" thickness, 1.265" outside diameter, and 0.766" inside diameter.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A formed circular finish cup washer designed for use with flat or oval head screws. It is made of brass and has a copper color. The washer measures 0.091 in overall height, 0.447 in outside diameter, and 0.181 in inside diameter.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A flat cut washer designed for assembly around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. It is made of silicon with a bronze finish. The washer has 14 GA thickness, a 7/8 in outside diameter, and a 3/8 in inside diameter.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A flat cut washer for assembly around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. It is made of silicon with a bronze finish. The washer has a thickness of 14 GA, an outside diameter of 1 in, and an inside diameter of 7/16 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Flat cut washer designed to improve stress distribution and span large clearance holes. Made of silicon bronze with a bronze finish and copper color. It has a thickness of 10, an outside diameter of 1-3/4", and an inside diameter of 11/16".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 1477-1488 of 1,814 results