Showing 1393-1404 of 1,814 results
A split lock washer for use where greater bolt tension and resistance to loosening from vibration are needed. It is made of steel with a zinc plated finish and has a silver color. The washer has a thickness of 0.125", an outside diameter of 0.869", and an inside diameter of 0.512".
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*
A fender washer with a 1/4" inside diameter and 1-1/2" outside diameter. It is made of 18-8 stainless steel with a stainless finish. The sheet lists a thickness range of 0.047" to 0.080".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A fender washer with an extra wide bearing surface, originally designed for auto body repair work and also used in sheet metal, plumbing, and electrical work. It is made of 18-8 stainless steel with a stainless finish. The washer has a 1/4 in inside diameter, 1-1/2 in outside diameter, and thickness of 0.047 in to 0.080 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Flat cut washer designed to improve stress distribution and span large clearance holes. It is made of brass with a copper color finish. The washer has a thickness of 0.080", an outside diameter of 0.749", and an inside diameter of 0.327".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Belleville washers made of spring steel with a zinc plated finish. They fit 1/4" bolt sizes and are supplied in a jar. The sheet lists a thickness of 0.052", an inside diameter of 0.258", and an outside diameter of 0.688".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
External locking washer for 5/16" fasteners. Made of steel with a zinc plated finish. The sheet identifies it as a lock washer with external teeth.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Internal locking washer for 5/16" fasteners. Made of steel with a zinc plated finish. The sheet identifies it as a lock washer with internal tooth design.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Flat cut washer designed to improve stress distribution and span large clearance holes. It is made of brass with a copper color finish. The washer has a thickness of 0.034 in, an outside diameter of 0.375 in, and an inside diameter of 0.161 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Flat cut washer designed to improve stress distribution and span large clearance holes. It is made of brass with a copper color finish. The washer has a thickness of 0.034 in, an outside diameter of 0.375 in, and an inside diameter of 0.177 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Bonded sealing washer for use where keeping water from seeping into the fastener or fastener hole is needed. It is made of steel with a galvanized finish and has a rubberized underside that forms a water-tight seal around the fastener and fastener hole. The washer is silver in color and uses EPDM seal material.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Flat cut washers designed to improve stress distribution and span large clearance holes. They are used around a bolt or screw between the bearing surface of the fastener and the part it is attached to. This washer is silicon bronze with a bronze finish and copper color.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Flat cut washer designed to improve stress distribution and span large clearance holes. It is made of brass with a copper color finish. The washer has a thickness of 0.034 in, an outside diameter of 0.438 in, and an inside diameter of 0.208 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 1393-1404 of 1,814 results