Box support assembly for 1 EMT/Rigid/IMC conduit with plain 1/4 mounting hole.

A 6-hole bracket identified as BRACKET 6 HOLE 12-1/2. The sheet lists it as zinc plated. No additional dimensions or construction details are printed beyond the 12-1/2 in size reference in the title.

Bracket for 1-5/8 channel with a notched-down design. It is zinc plated. The sheet lists the length as 18 inches.

A slotted shelf bracket, left hand, with a 10-inch size. It is zinc plated. The sheet identifies it as catalog number BRSSL10EG.

Bracket 1-5/8 Channel Wrap Around 12 in Zinc Plated. It is a wall mount bracket for 1-5/8 channel applications. The sheet identifies the finish as zinc plated and the length as 12 in.

Bracket for 1-5/8 channel with brace, 12 inches long. It is zinc plated. The sheet identifies it as catalog number BRC162B12EG.

Steel bracket for 1-5/8" strut channel. It is made of carbon steel with an electro-galvanized finish. The bracket is 18" long, 2" wide, and 6-1/4" high, with 9/16" mounting holes. Uniform load is 1,300 lb (5.78 kN) when mounted on 12 gauge channel.

WALL MOUNT BRKT UY74A/UX74A/Y75A/X75C

A 24 in. stud box support fastener for mounting electrical boxes between studs on 26 in. centers. It is made of pre-galvanized steel with a silver finish. The sheet notes that Black Claw™ spring steel hardware is included.

The PatchRunner 2 Vertical Cable Manager PDU Bracket attaches directly to the backbone of the manager. This allows the PDUs to mount within the footprint of the solution, rather than mounting off the back of the rack. The tool-less design allows for very simple and fast installation, with no hardware required. The brackets are steel, come as a pair and are black in color.

Box support assembly with 1/4-20 stud 5/8 long in center hole for use with 1/2 - 3/4 EMT/Rigid/IMC conduit.

Box support assembly for 1/2 - 3/4 EMT/Rigid/IMC conduit with plain mounting hole for screw or threaded rod mount.