Mounting Bracket with Welded on Parking Stand for MVI/MVS - Single Phase. Bracket 2.30 inch Inside Radius x 4.375 inch

Bail Bracket for MVS1 and MVI1. Includes 300 Series Stainless Steel Bolt and 18-8 Stainless Steel Nut, 10-32 x 1-1/2 inch Stainless Steel Phillips Screw with 10-32 Stainless Steel Stop Nut. Bail 5.211 x 3.885 inches. Bracket 2.800 inch deep.

Multi-Way Double Side Padmount Switch Gear Riser Kit. 18 inch Riser for 54 x 54 inch Enclosure. #12 Gage (.1046) G90 Hot Dipped Galvanized Steel. Meets ANSI C57.12.28-2005 for Paint Finish. Color Munsell Green - #7GY 3.29/1.5. All Hardware to Bolt to Enclosure is Included.

Multi-Way Sub Surface Switch Gear, Three-Phase, 15.5kV, 4 Way, with (3) Three-Phase Vacuum Switches (1) Single-Phase Vacuum Interrupter, 600/200, Amp Terminations

Multi-Way Sub Surface Switch Gear, Three-Phase, 15.5kV, 4 Way, with (1) Three-Phase Vacuum Switches (3) Single-Phase Interrupters, 200 Amp Terminations, Modular

Multi-Way Double-Sided Padmount Switch Gear, Three-Phase, 15.5kV, 3 Way, with (3) Three-Phase Vacuum Switches, 600/200 Amp Terminations

Multi-Way Single-Sided Padmount Switch Gear, Three-Phase, 15.5kV, 2 Way, with Three-Phase Vacuum Interrupter, 200 Amp Terminations

Multi-Way Double-Sided Padmount Switch Gear, Three-Phase, 15.5kV, 4 Way, with (2) Three-Phase Vacuum Switches (2) Single-Phase Interrupters, 600/200 Amp Terminations, 80 Control, Stainless Steel

Multi Way Switch, SubSurface, 3 Phase, 38 kv, 2 Way, Molded Vacuum Switch, 600 Amps

Multi-Way Switchgear, Double-Sided Padmount, 3-Phase, 15kV/12.5kA, 3-Ways, 1-Source Way - 3-Phase MVS Switch - 600 Amp Bushing Interface - No Source Control. 2-Load Ways - 3-Phase MVI Fault Interrupter - 600 Amp Bushing Interface - SEL 751A Relay Control. One 15 kV PT. No Cam-Op or Integral Position Indicator. Enclosure Mild Steel, Munsell Green 7GY 3.29/1.5 and Flat Ground Bar. Engish Labels and Instructions.

Multi-Way, Single Sided Padmount, 1-Phase, 15kv/12.5KA, 3-Point Junction, Point 1 is 600 Amp Bushing, Point 2 is MVI1 with 200 Amp Bushing Well on Mainbody Interface, 600 Amp T-Body on Endbody Interface and Elastimold Internal Control. Point 3 is 600 Amp Bushing.

Tester for Molded Vacuum Interrupter 115 Volt Input, Dimensions 9.9 inch High x 14 inch wide x 11 inch Deep. Circuit Breaker and Over current Relay Test Set.