Showing 1165-1176 of 2,024 results

Contact for Pricing

ABB - Installation Products · Ocal
EFS175F2-G
PVC Coated Gray Non-Selaed From Operated Tumbler Switch, Dead-End, Hub Size 3/4 Inch/21 Metric, Switch 2 Pole
Contact for Pricing

ABB - Installation Products · Ocal
EFD275NLQ-G
PVC Coated Mounting Body for Control Station, Dead End, Two Gang, Hub Size 3/4 Inch/21 Metric, Gray
Contact for Pricing

ABB - Installation Products · OCAL
DSD933-G
PVC Coated Control Station Component, Front Operated General Use Snap Switch, 1 Pole, Aperes 120 VAC 20, 277 VAC 20, Gray
Contact for Pricing

ABB - Electrification · GE
571B595DDG2
Molded Case Circuit Breaker, Q-Line, Accessories, 240V Class, Mounting Accessories for TQL DDG29069
Contact for Pricing

Contact for Pricing

ABB - Electrification · GE
CR305X500C
Drive motors. Salem parts-Miscellaneous parts. Auxiliary contact. X500C
Contact for Pricing

ABB - Electrification · GE
CR305X200A
Drive motors. Salem parts-Miscellaneous parts. Auxiliary contact. CR305X20
Contact for Pricing

ABB - Electrification · GE · Spectra RMS, Mag-Break
SPST024R
The shunt trip accessory is an electronic module which provides remote control capability to open the circuit breaker. When activated, the shunt trip sends a signal to the trip unit to open the breaker. This allows the trip unit to record, display, and communicate (in MicroVersaTrip PM trip units) that the opening event was initiated by the shunt trip device. The shunt trip is continuously rated and requires no cut-off switch. When energized, the shunt trip supplies +24 Vdc power to the trip unit to power the display. 024R Amps 400 A
Contact for Pricing

ABB - Electrification · GE
TNIA64
No matter the application, we’ve got you covered with a rugged, reliable and easy-to-install Spec-Setter safety switch. 200AMP FUSIBLE NEUTRAL KIT
Contact for Pricing

ABB - Electrification · GE · Spectra RMS, Mag-Break
SPRCS240R
This accessory provides an electrically operated solenoid, which, when energized, closes the breaker. It is suitable for control interlock schemes in which manual closing capability would not be convenient or desirable. The breaker is provided with a manual close button which can be replaced by the Hidden "ON" Button accessory and/or sealed using the Limited Access Pushbutton Cover accessory. The remote closing accessory is continuously rated and has an anti-pump feature which prevents a motor operated breaker from repeatedly closing into a fault. Closing control voltage must be removed and re-applied for each breaker closure. 240R Amps 90 A
Contact for Pricing

Contact for Pricing