Showing 493-504 of 694 results
A roller trolley 4 bearing assembly identified as RT4BAEG. It has a zinc plated finish. The sheet does not list any additional dimensions or material details.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
A roller trolley 2 bearing assembly. It is zinc plated. The sheet does not list any additional dimensions or material details beyond the product name and finish.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
A 2-hole open 45 degree corner angle made from Type 316 stainless steel. The sheet identifies it as a steel angle with a 45 degree angle. It is intended for corner-angle applications and is made of 316 stainless steel.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
A 2-hole open 45 degree corner angle made from Type 304 stainless steel. The sheet identifies the angle as 45 degrees and the material as 304 stainless steel. It is a stainless steel angle used where a 45 degree corner angle is needed.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
Z fitting corner brace with 8 holes. It is zinc plated. The sheet identifies it as catalog number FZB8HEG.
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*
Z fitting 2 hole support with a 7 inch length. It is electro-galvanized for finish and has a thickness of 1/4 inch. The outside width is 1-5/8 inch and the hole diameter is 9/16 inch.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
Z fitting 2 hole support for steel angle applications, sized 5 inches. It has a 1/4 inch thickness and an outside width of 1-5/8 inch. The holes are 9/16 inch diameter and the finish is electro-galvanized.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
Z fitting 2 hole support with a 6 in length. It is made with a 1/4 in thickness and has an outside width of 1-5/8 in. The holes are 9/16 in diameter and the finish is electro-galvanized.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
A steel angle fitting identified as 1 S Hooks ZP with the descriptor Z Fitting Cross 2 Hole 3-1/4. The sheet does not list material, finish, or dimensional attributes in the product attributes table. Catalog number FZX2H325EG is shown on the sheet.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
Z fitting offset 2 hole support with a zinc plated finish. The sheet identifies it as a 5/32-3/16 pin hex bit. No additional dimensions or material details are printed on the sheet.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
A Z fitting cross with 2 holes and a 1-5/8 size designation. It is zinc plated. The sheet identifies it as catalog number FZX2H162EG.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
A Z fitting cross with 2 holes, identified as catalog number FZX2H81EG. It is made of steel with an electro-galvanized finish. The fitting has a thickness of 1/4", an outside width of 1-5/8", and hole diameter of 9/16".
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
Showing 493-504 of 694 results