Showing 7765-7776 of 7,944 results
A 12 x 2 inch self-tapping sheet metal screw. It has a pan head and Phillips drive. The screw is made of 18-8 stainless steel and is supplied in a jar.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is an 8-32 x 3/4 inch machine screw with a round head and Phillips drive. It is made of 18-8 stainless steel. The sheet identifies it as a jar-pack item.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a hex head lag bolt used as a large wood screw in corrosive or harsh environments. It is made of 18-8 stainless steel with a plain finish. The bolt measures 5/16 in. diameter by 3-1/2 in. length and has a hex head with 1/2 in. across the flats and 7/32 in. head height.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
A 14 x 1-1/2 inch self-tapping sheet metal screw with a flat head and square drive. It is made of 18-8 stainless steel. The sheet identifies it as a jar-packaged product.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A machine screw with a pan head and Phillips drive. It is made of 18-8 stainless steel and sized 1/4-20 x 1/2 in. Intended for use with a pre-tapped hole or with a nut.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a machine screw with a round head and slotted drive. It is made of stainless steel with a stainless finish. The screw size is 1/4"-20 x 3/4", with a length of 0.750 in., thread size 20, head height 0.167 in., and head diameter 0.457 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A 12 x 1-1/2 inch self-tapping sheet metal screw. It has a flat head and square drive. The screw is made of 18-8 stainless steel and is supplied in a jar.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Hex head cap screw sized 3/8-16 x 2 in. It is partial threaded and made of 316 stainless steel. The sheet identifies it as a jar-pack product.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Hex head cap screw with partial threading. It is made of 18-8 stainless steel and is sized 3/8-16 x 2-1/2 in. The sheet identifies it as a jar-pack product.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
This is a 3/4-10 x 3-1/2 inch hex head tap bolt. It is fully threaded and made of 18-8 stainless steel. The bolt is supplied in a box.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
A hex head lag screw used as a large wood screw in corrosive or harsh environments. It is made of 18-8 stainless steel with a plain finish. The screw measures 5/16 in. diameter by 1-1/2 in. length and has a 9 TPI thread with a hex head.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Self-drilling (TEK) sheet metal screw with a hex washer head and #2 drill point. It is made of 410 stainless steel and has a 8-18 thread size with a 3/4 in length. The product is supplied in a jar.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 7765-7776 of 7,944 results