A 6-inch driver extension bit with a quick connect coupler. It is made of chrome plated steel and has a 1/4-inch hex shank. The shank length is 1.000 inch and the overall length is 6 inches.

This is a power bit with a #1 Phillips drive tip and a 1/4" hex shank. It is made of steel and has an overall length of 4". It is intended for use with 1/4" hex shank drivers.

Phillips drive hex power bit for #2 Phillips fasteners. It is made of steel and has a 1/4" hex shank. The overall length is 1" and the shank length is 1/2".

This is a single power bit with a Phillips Drive tip and a hex shank. It is made of steel and has an overall length of 6 inches. The shank size is 1/4 inch and the tip size is #3.

Power bit with a #3 square drive tip and a 1/4" hex shank. It is made of steel and has an overall length of 8". It is for use with 1/4" hex shank drivers.

This is a power bit with a #1 Phillips drive tip and a 1/4" hex shank. It is made of steel and has an overall length of 3". It is intended for use with 1/4" hex shank drivers.

A double-ended replacement spanner bit for #10 and #12 spanner fasteners. It is made of steel with a hex shank. The bit measures 2" overall length with a 1" shank length and 1/4" shank size.

This is a double-ended replacement bit for tamper resistant Torx screws. It is made of steel and has a hex shank. The bit has a 2" overall length and a 1/4" shank size.

This is a power bit for use with 1/4" hex shank drivers. It has a Phillips Drive tip size #2 and a hex shank. The bit is made of steel and has an overall length of 4".

These are power bits with a #2 Phillips drive tip and a 1/4" hex shank. They are made of steel and have an overall length of 2 inches. The sheet lists 125 pieces per jar and notes use with 1/4" hex shank drivers.

This is a power bit for use with 1/4" hex shank drivers. It has a slotted drive tip sized for #8-10 fasteners and an overall length of 2 inches. The bit is made of steel and has a 1/4" hex shank.

This is a 3-inch insert bit with a slotted drive tip and a 1/4-inch hex shank. It is made of steel and is intended for use with 1/4-inch hex shank drivers. The tip size is #8-10.