Showing 25-36 of 40 results
A steel wire S-hook with blunt ends and single notches cut into the outer edge of the two ends. It is zinc plated steel with a silver finish. Overall length is 1-1/4 in. It is designed to be used with other components to temporarily lift and/or suspend light weights.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A steel S-hook designed to be used with other components to temporarily lift and/or suspend light weights. It has an overall length of 2 inches and a silver color. The working load limit is 219 lbs, based on the hook being closed on both ends until each leg touches the center wire.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
An S-hook made of steel with a zinc-plated finish. The overall length is 1-1/4 in. It is designed to be used with other components to temporarily lift and/or suspend light weights. The working load limit is 61 lbs when the hook is closed on both ends to the point where each leg touches the center wire of the S-hook.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Minerallac Company · Minerallac · Cully
70016BFG
A steel wire S-hook with blunt ends and single notches cut into the outer edge of the two ends. It is bright finish steel with a silver finish. Overall length is 1 inch. Designed to be used with other components to temporarily lift and/or suspend light weights.
Contact for Pricing
Minimum Qty: 5000
Multiplier: 5000
*Contact for lower quantities*
1-1/2 in. S-hook designed to be used with other components to temporarily lift and/or suspend light weights. The sheet title identifies it as Type 304 stainless steel. It has an overall length of 1-1/2 in. and a silver color.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a 1-1/2 inch S-hook for temporary lifting or suspending light weights when used with other components. The sheet title identifies it as Type 304 stainless steel, and the product is shown with a silver finish. It has an overall length of 1-1/2 inches.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A steel wire S-hook with blunt ends and single notches cut into the outer edge of the two ends. It is zinc plated steel and has an overall length of 2-1/4 in. It is designed to be used with other components to temporarily lift and/or suspend light weights.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
An S-hook designed to be used with other components to temporarily lift and/or suspend light weights. It is made of steel with a zinc-plated silver finish. The overall length is 1-1/2" and the working load limit is 71.3 lbs.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a 3-inch S-hook made of steel. It has a zinc-plated finish and a silver color. The hook is designed to be used with other components to temporarily lift and/or suspend light weights. Its working load limit is 253 lbs when closed on both ends so each leg touches the center wire.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
A steel wire S-hook with blunt ends and single notches cut into the outer edge of the two ends. It is made of zinc plated steel and has an overall length of 3/4 inch. Designed to be used with other components to temporarily lift and/or suspend light weights.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A steel wire S-hook with blunt ends and single notches cut into the outer edge of the two ends. It is zinc plated steel with a silver finish. Overall length is 1 inch. Designed to be used with other components to temporarily lift and/or suspend light weights.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 25-36 of 40 results