S-Hook, 2 in. overall length, 0.250 in. hook diameter, Stainless Steel hook material, , 100 per pack, For use with JC10 Jack Chain

S-Hook, 3/4 in. overall length, 0.092 in. hook diameter, Stainless Steel hook material, , 100 per pack, For use with JC14 Jack Chain

S-Hook, 1-1/2 in. overall length, 0.135 in. hook diameter, Steel galvanized hook material, Zinc Chromate finish, 100 per pack, For use with JC10/JC12 Jack Chain

1-1/4 x .105 S Hook Steel Zinc

11.75 x 5.875 x 0.5 PVC S-Hook

Stripe Inverted Tip Marking Pa ALERT ORANGE 16OZ CAN

S-Hook, 1-3/4 in. overall length, 0.186 in. hook diameter, Steel galvanized hook material, Zinc Chromate finish, 100 per pack, For use with JC10/JC12 Jack Chain

S Hook, Steel, Size 1-1/4 Inch

This is a steel S-hook with a zinc-plated finish. It has an overall length of 2 inches and is silver in color. It is designed to be used with other components to temporarily lift and/or suspend light weights. The working load limit is 219 lbs when the hook is closed on both ends to the point where each leg touches the center wire of the S-hook.

This is a steel S-hook with a zinc-plated finish. It has an overall length of 2-1/2 inches. It is designed to be used with other components to temporarily lift and/or suspend light weights.

A steel wire S-hook with blunt ends and single notches cut into the outer edge of the two ends. It is made of zinc plated steel and has an overall length of 7/8 in. It is designed to be used with other components to temporarily lift and/or suspend light weights.

A steel wire S-hook with blunt ends and single notches cut into the outer edge of the two ends. It is zinc plated steel with a silver finish. Overall length is 1-1/4 in. It is designed to be used with other components to temporarily lift and/or suspend light weights.