Showing 97-108 of 3,039 results
FLSR.300 is a Class RK5 fuse with an ampere rating of 0.3 and cartridge-style construction.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
IDSR004 is a Class RK5 fuse with an ampere rating of 4 and cartridge-style construction.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
FLSR.800ID is a Class RK5 fuse with an ampere rating of 0.8 and cartridge-style construction.
Contact for Pricing
FLSR050ID is a Class RK5 fuse with an ampere rating of 50 and cartridge-style construction.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
The NH system is classified among plug-in fuse systems and is composed of: • fuse-base (possibly including terminal covers and phase barriers) • fuse-link with blade contact • fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type gG NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. 500 Volts 500 amps gG NH4 series.
Contact for Pricing
NH solid links have a standard design. The current carrying parts are made of silver plated copper. It's also possible to get nickel plated design on request. The synthetic parts for insulated tags are in accordance with VDE 0636/DIN 57635 NH1 series.
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*
The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. The system is the most modern of the screw systems and designed for 400VAC/250VDC networks. The D0 fuse range comprises the standardized fuse sizes D01, D02 and D03. The range of applications for D0 fuse-links for general application is the protection of cables and power lines. They limit and cut off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D0 fuse-links gG also protect equipments and installations against dynamic effects of high short circuit currents. 400 Volts D01 locking screw cap (for industry only) .
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
The NH system is classified among plug-in fuse systems and is composed of: • fuse-base (possibly including terminal covers and phase barriers) • fuse-link with blade contact • fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type gG NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. NH pulling handle with cuff .
Contact for Pricing
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
Fuse A4BY - Class L - Time-Delay 600VAC 300VDC 3000A Blade TI Indicator Amp-Trap®
Contact for Pricing
Contact for Pricing
Showing 97-108 of 3,039 results