All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Circuit Protection Devices And Accessories

Subcategories

    Automotive Fuse

    Blade Fuses

    Cartridge Fuses

    Ceramic Fuses

    Circuit Breakers

    Circuit Interruptor

    Current Limiter

    Diazed Or Bottle Fuses

    Electronic Fuse

    Fuse Block

    Fuse Clip

    Fuse Holder

    Fuse Parts Or Accessories

    Glass Body Fuses

    Grounding Devices Or Assemblies

    High Speed Fuse

    Lightning Protection Apparatus And Accessories

    Medium Voltage Fuse

    Midget Fuses

    Miniature Circuit Breakers

    Molded Case Circuit Breakers

    Plug Fuses

    Power Fuse

    Semiconductor Fuse

    Surge Arrestor

    Surge Suppressers

    Time Delay Fuses

    Transient Protection Materials

    Vacuum Interruptor

    Voltage Regulator

Showing 673-684 of 3,038 results

Littelfuse FLNR150ID - FLNR150ID is a Class RK5 fuse with an ampere rating of 150 and knife-blade-style construction.
Littelfuse · FLNR Series

FLNR150ID

FLNR150.XXID


FLNR150ID is a Class RK5 fuse with an ampere rating of 150 and knife-blade-style construction.

Contact for Pricing

Littelfuse FLSR.100ID - FLSR.100ID is a Class RK5 fuse with an ampere rating of 0.1 and cartridge-style construction.
Littelfuse · FLSR Series

FLSR.100ID

FLSR.100TXID


FLSR.100ID is a Class RK5 fuse with an ampere rating of 0.1 and cartridge-style construction.

Contact for Pricing

Littelfuse FLNR300ID - FLNR300ID is a Class RK5 fuse with an ampere rating of 300 and knife-blade-style construction.
Littelfuse · FLNR Series

FLNR300ID

FLNR300.XXID


FLNR300ID is a Class RK5 fuse with an ampere rating of 300 and knife-blade-style construction.

Contact for Pricing

Littelfuse FLNR400ID - FLNR400ID is a Class RK5 fuse with an ampere rating of 400 and knife-blade-style construction.
Littelfuse · FLNR Series

FLNR400ID

FLNR400.XXID


FLNR400ID is a Class RK5 fuse with an ampere rating of 400 and knife-blade-style construction.

Contact for Pricing

Littelfuse FLSR.250ID - FLSR.250ID is a Class RK5 fuse with an ampere rating of 0.25 and cartridge-style construction.
Littelfuse · FLSR Series

FLSR.250ID

FLSR.250TXID


FLSR.250ID is a Class RK5 fuse with an ampere rating of 0.25 and cartridge-style construction.

Contact for Pricing

Littelfuse FLNR600ID - FLNR600ID is a Class RK5 fuse with an ampere rating of 600 and knife-blade-style construction.
Littelfuse · FLNR Series

FLNR600ID

FLNR600.XXID


FLNR600ID is a Class RK5 fuse with an ampere rating of 600 and knife-blade-style construction.

Contact for Pricing

Littelfuse FLNR045ID - FLNR045ID is a Class RK5 fuse with an ampere rating of 45 and cartridge-style construction.
Littelfuse · FLNR Series

FLNR045ID

FLNR045.TXID


FLNR045ID is a Class RK5 fuse with an ampere rating of 45 and cartridge-style construction.

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Littelfuse LFCL500A6 - 600 VOLT CABLE LIMITER 500 ALUM 6 TERM. Cable limiters are fusible devices that provide very fast short-circuit protection, primarily to faulted cables, but also to other conductors such as busway. Cable limiters do not have an ampere rating, and cannot be used to provide overload protection. Cable limiters are selected by cable size, for example, a 500 kcmil cable requires a 500 kcmil cable limiter. Their main use is to isolate faulted cables in circuits containing three or more parallel conductors per phase. They may be installed on the line side of the main service to provide short-circuit protection to the service conductors. This is especially important when service conductors are tapped from large low-voltage networks or from large low impedance transformers. Cable limiters have terminals which permit them to be installed in a variety of equipment. The most common configuration is the offset blade on one end and the crimp terminal on the other end. This permits the limiter to replace a cable terminal (lug). Applications: Service entrance conductors, between transformers or network bus and busway terminal boxes, large feeders with three or more conductors per phase. Features: Current-limiting characteristics provide protection to conductor insulation and reduce damage when faults occur. Properly applied cable limiters may permit the use of equipment with reduced withstand ratings. Wide variety of terminations and cable ratings permit use in almost every situation.
Littelfuse · LFCL Series

LFCL500A6

LFCL0500ZA6


600 VOLT CABLE LIMITER 500 ALUM 6 TERM. Cable limiters are fusible devices that provide very fast short-circuit protection, primarily to faulted cables, but also to other conductors such as busway. Cable limiters do not have an ampere rating, and cannot be used to provide overload protection. Cable limiters are selected by cable size, for example, a 500 kcmil cable requires a 500 kcmil cable limiter. Their main use is to isolate faulted cables in circuits containing three or more parallel conductors per phase. They may be installed on the line side of the main service to provide short-circuit protection to the service conductors. This is especially important when service conductors are tapped from large low-voltage networks or from large low impedance transformers. Cable limiters have terminals which permit them to be installed in a variety of equipment. The most common configuration is the offset blade on one end and the crimp terminal on the other end. This permits the limiter to replace a cable terminal (lug). Applications: Service entrance conductors, between transformers or network bus and busway terminal boxes, large feeders with three or more conductors per phase. Features: Current-limiting characteristics provide protection to conductor insulation and reduce damage when faults occur. Properly applied cable limiters may permit the use of equipment with reduced withstand ratings. Wide variety of terminations and cable ratings permit use in almost every situation.

Contact for Pricing

Littelfuse FLNR050ID - FLNR050ID is a Class RK5 fuse with an ampere rating of 50 and cartridge-style construction.
Littelfuse · FLNR Series

FLNR050ID

FLNR050.TXID


FLNR050ID is a Class RK5 fuse with an ampere rating of 50 and cartridge-style construction.

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Littelfuse FLNR060ID - FLNR060ID is a Class RK5 fuse with an ampere rating of 60 and cartridge-style construction.
Littelfuse · FLNR Series

FLNR060ID

FLNR060.TXID


FLNR060ID is a Class RK5 fuse with an ampere rating of 60 and cartridge-style construction.

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Littelfuse LFCL500C3 - Cable limiters are fusible devices that provide very fast short-circuit protection, primarily to faulted cables, but also to other conductors such as busway. Cable limiters do not have an ampere rating, and cannot be used to provide overload protection. Cable limiters are selected by cable size; for example, a 500 kcmil cable requires a 500 kcmil cable limiter. Their main use is to isolate faulted cables in circuits containing three or more parallel conductors per phase. They may be installed on the line side of the main service to provide short-circuit protection to the service conductors. This is especially important when service conductors are tapped from large low-voltage networks or from large low impedance transformers. Cable limiters have terminals which permit them to be installed in a variety of equipment. The most common configuration is the offset blade on one end and the crimp terminal on the other end. This permits the limiter to replace a cable terminal (lug).
Littelfuse · LFCL Series

LFCL500C3

LFCL0500ZC3


Cable limiters are fusible devices that provide very fast short-circuit protection, primarily to faulted cables, but also to other conductors such as busway. Cable limiters do not have an ampere rating, and cannot be used to provide overload protection. Cable limiters are selected by cable size; for example, a 500 kcmil cable requires a 500 kcmil cable limiter. Their main use is to isolate faulted cables in circuits containing three or more parallel conductors per phase. They may be installed on the line side of the main service to provide short-circuit protection to the service conductors. This is especially important when service conductors are tapped from large low-voltage networks or from large low impedance transformers. Cable limiters have terminals which permit them to be installed in a variety of equipment. The most common configuration is the offset blade on one end and the crimp terminal on the other end. This permits the limiter to replace a cable terminal (lug).

Contact for Pricing

Littelfuse LFCL500C1 - Cable limiters are fusible devices that provide very fast short-circuit protection, primarily to faulted cables, but also to other conductors such as busway. Cable limiters do not have an ampere rating, and cannot be used to provide overload protection. Cable limiters are selected by cable size; for example, a 500 kcmil cable requires a 500 kcmil cable limiter. Their main use is to isolate faulted cables in circuits containing three or more parallel conductors per phase. They may be installed on the line side of the main service to provide short-circuit protection to the service conductors. This is especially important when service conductors are tapped from large low-voltage networks or from large low impedance transformers. Cable limiters have terminals which permit them to be installed in a variety of equipment. The most common configuration is the offset blade on one end and the crimp terminal on the other end. This permits the limiter to replace a cable terminal (lug).
Littelfuse · LFCL Series

LFCL500C1

LFCL0500ZC1


Cable limiters are fusible devices that provide very fast short-circuit protection, primarily to faulted cables, but also to other conductors such as busway. Cable limiters do not have an ampere rating, and cannot be used to provide overload protection. Cable limiters are selected by cable size; for example, a 500 kcmil cable requires a 500 kcmil cable limiter. Their main use is to isolate faulted cables in circuits containing three or more parallel conductors per phase. They may be installed on the line side of the main service to provide short-circuit protection to the service conductors. This is especially important when service conductors are tapped from large low-voltage networks or from large low impedance transformers. Cable limiters have terminals which permit them to be installed in a variety of equipment. The most common configuration is the offset blade on one end and the crimp terminal on the other end. This permits the limiter to replace a cable terminal (lug).

Contact for Pricing

Showing 673-684 of 3,038 results