Showing 649-660 of 3,038 results

CNN_E fuses are rated for applications up to 80 V dc. As fork lift trucks and electrical vehicle system voltages increase, circuit protection needs to be rated higher than the standard CNN products to handle the increased voltage. The CNN_E is considered very fast-acting for quicker reaction time.
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*

Littelfuse · SPFR Series
SPFR350.X
1000VDC 350AERE SOLAR FUSE. The SPFR series was designed to meet the growing needs of the solar industry with higher amperage and voltage requirements. Applications: Solar Inverters. High amperage combiner boxes. Features/Benefits: DC Voltage rating meets European system and North American utility scale requirements. Multiple amperage ratings. RoHS compliant. Class H Dimensions. Full Range Protection.
Contact for Pricing

Littelfuse POWR-PRO® LDC series Class L fuses represent another first in fuse protection. LDC series fuses are the first UL Listed 600 volts AC and DC Class L fuse. Since they may be used for both AC and DC, they eliminate the concern that AC only fuses may be inserted into DC circuits. While LDC series fuses’ UL Listed DC interrupting rating is more than adequate for most applications (50,000 amperes at a 16 millisecond time constant), tests in our high power testing laboratory have shown that this remarkable fuse is capable of performing at much longer time constants. This makes the fuse uniquely suited for such applications as crane rail circuits and mass transit systems. Contact the factory for application information for special needs such as this. For AC-only systems, consider the use of POWR-PRO® KLPC series fuses. They have a full ten seconds time-delay at 500% rated current, and have a wider range of ratings.
Contact for Pricing

The L15S series is a traditional North American Bolted style high-speed fuse for protection of power semiconductor devices that are rated up to 150 V ac and up to 150 V dc Littelfuse POWR-SPEED ® products offer optimized circuit protection at the extremely fast speed required to protect power semiconductor devices such as silicon controlled rectifiers (SCR’s), diodes, thyristors, triacs, transistors, and similar solid-state devices. These devices are used in power equipment including variable speed drives, power rectifiers, UPS systems, dc power supplies, and in a wide range of electronic equipment. May be used wherever extremely fastacting, current-limiting fuses with no time delay are required.
Contact for Pricing

NLN series fuses provide low cost protection for general-purpose feeder and branch circuits when available short circuit currents are less than 50,000 amperes. They replace all Class H fuses which have only a 10,000 ampere interrupting rating. They are suitable for use in many residential and smaller commercial and industrial applications. NLKP series fuses are Canadian “Code” fuses specifically designed to meet Canadian Electrical Code Type P fuse requirements for residential use. They have a 10,000 ampere interrupting rating. However, to obtain the added benefits of time-delay, current-limitation, and higher interrupting rating, consider the use of POWR-PRO™ IDSR Indicator™ fuses for circuits between 250 and 600 volts. The user gets all the benefits of time-delay RK5 fuses plus the added benefits of a n indicating fuse that tells when it has opened. Complete information on these fuses may be found in the POWR-PRO™ section of this catalog. For circuits up to 250 volts, see FLNR fuses in this section of the catalog.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

FLSR.800 is a Class RK5 fuse with an ampere rating of 0.8 and cartridge-style construction.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

FLSR075 is a Class RK5 fuse with an ampere rating of 75 and knife-blade-style construction.
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*

Littelfuse POWR-PRO® LDC series Class L fuses represent another first in fuse protection. LDC series fuses are the first UL Listed 600 volts AC and DC Class L fuse. Since they may be used for both AC and DC, they eliminate the concern that AC only fuses may be inserted into DC circuits. While LDC series fuses’ UL Listed DC interrupting rating is more than adequate for most applications (50,000 amperes at a 16 millisecond time constant), tests in our high power testing laboratory have shown that this remarkable fuse is capable of performing at much longer time constants. This makes the fuse uniquely suited for such applications as crane rail circuits and mass transit systems. Contact the factory for application information for special needs such as this. For AC-only systems, consider the use of POWR-PRO® KLPC series fuses. They have a full ten seconds time-delay at 500% rated current, and have a wider range of ratings.
Contact for Pricing

FAST ACTING LIFT TRUCK FUSE 10A. CBO fast-acting, CCK and CCL dual-element time-delay fuses are recommended for fork-lift trucks and other similar battery-operated equipment.
Contact for Pricing

Perfect for use in lighting systems, this 300 VAC time delay fuse is designed to handle ballast transformer in-rush currents.
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*

JLLS900 is a Class T fuse with an ampere rating of 900 and knife-blade-style construction.
Contact for Pricing

Perfect for use in lighting systems, this 300 VAC time delay fuse is designed to handle ballast transformer in-rush currents.
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*