Showing 1897-1908 of 3,038 results

The NH system is classified among plug-in fuse systems and is composed of: • fuse-base (possibly including terminal covers and phase barriers) • fuse-link with blade contact • fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type gG NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. 690 Volts 160 amps NH00 3 pole clamp terminal fuse base .
Contact for Pricing

The D fuse-system is the first generation of screw fuse-system in the german DIN standard. It is still used in many installations. Applications are low voltage ditribution units, where non trained persons are allowed to change the fuse-links. The D fuse range comprises the sizes NDZ, DII, DIII, DIV, DV. The range of applications for D fuse-links is the protection of cables and power lines. They limit and cut-off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D fuse-links gG also protect equipments and installations against dynamic effects of high short circuit currents. 500 Volts 25 amps DII 1 pole cover (wide) .
Contact for Pricing
Minimum Qty: 30
Multiplier: 30
*Contact for lower quantities*

The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. The system is the most modern of the screw systems and designed for 400VAC/250VDC networks. The D0 fuse range comprises the standardized fuse sizes D01, D02 and D03. The range of applications for D0 fuse-links for general application is the protection of cables and power lines. They limit and cut off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D0 fuse-links gG also protect equipments and installations against dynamic effects of high short circuit currents. D02 to D03
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

The NH system is classified among plug-in fuse systems and is composed of: • fuse-base (possibly including terminal covers and phase barriers) • fuse-link with blade contact • fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type gG NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. 690 Volts 160 amps NH00 terminal cover .
Contact for Pricing
Minimum Qty: 20
Multiplier: 20
*Contact for lower quantities*

The NH system is classified among plug-in fuse systems and is composed of: • fuse-base (possibly including terminal covers and phase barriers) • fuse-link with blade contact • fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type gG NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. 500 Volts 25 amps NH00 and NH000 3 Pole Masking Frame .
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*

Contact for Pricing

Contact for Pricing

Contact for Pricing

Contact for Pricing

Contact for Pricing

The Mersen Y1044106 is a high-quality industrial component designed for demanding applications where reliability and performance are critical. Engineered with precision, this product meets stringent industry standards, ensuring long-lasting durability and consistent operation. Ideal for use in industrial machinery, automation systems, and other high-performance environments, the Y1044106 delivers exceptional value with its robust construction and advanced engineering. Trust Mersen, a leader in industrial solutions, to provide components that enhance efficiency and reduce downtime in your operations.
Contact for Pricing

Fuse A6T - Class T - Fast-Acting 600VAC 300VDC 70A Blade Amp-Trap® 250 Pack
Contact for Pricing
Minimum Qty: 250
Multiplier: 250
*Contact for lower quantities*