All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Circuit Protection Devices And Accessories

Subcategories

    Automotive Fuse

    Blade Fuses

    Cartridge Fuses

    Ceramic Fuses

    Circuit Breakers

    Circuit Interruptor

    Current Limiter

    Diazed Or Bottle Fuses

    Electronic Fuse

    Fuse Block

    Fuse Clip

    Fuse Holder

    Fuse Parts Or Accessories

    Glass Body Fuses

    Grounding Devices Or Assemblies

    High Speed Fuse

    Lightning Protection Apparatus And Accessories

    Medium Voltage Fuse

    Midget Fuses

    Miniature Circuit Breakers

    Molded Case Circuit Breakers

    Plug Fuses

    Power Fuse

    Semiconductor Fuse

    Surge Arrestor

    Surge Suppressers

    Time Delay Fuses

    Transient Protection Materials

    Vacuum Interruptor

    Voltage Regulator

Showing 1657-1668 of 3,038 results

Littelfuse LFCL4/0A3 - 600 VOLT CABLE LIMITER 0A3. Cable limiters are fusible devices that provide very fast short-circuit protection, primarily to faulted cables, but also to other conductors such as busway. Cable limiters do not have an ampere rating, and cannot be used to provide overload protection. Cable limiters are selected by cable size, for example, a 500 kcmil cable requires a 500 kcmil cable limiter. Their main use is to isolate faulted cables in circuits containing three or more parallel conductors per phase. They may be installed on the line side of the main service to provide short-circuit protection to the service conductors. This is especially important when service conductors are tapped from large low-voltage networks or from large low impedance transformers. Cable limiters have terminals which permit them to be installed in a variety of equipment. The most common configuration is the offset blade on one end and the crimp terminal on the other end. This permits the limiter to replace a cable terminal (lug). Applications: Service entrance conductors, between transformers or network bus and busway terminal boxes, large feeders with three or more conductors per phase. Features: Current-limiting characteristics provide protection to conductor insulation and reduce damage when faults occur. Properly applied cable limiters may permit the use of equipment with reduced withstand ratings. Wide variety of terminations and cable ratings permit use in almost every situation.
Littelfuse · LFCL Series

LFCL4/0A3

LFCL04/0ZA3


600 VOLT CABLE LIMITER 0A3. Cable limiters are fusible devices that provide very fast short-circuit protection, primarily to faulted cables, but also to other conductors such as busway. Cable limiters do not have an ampere rating, and cannot be used to provide overload protection. Cable limiters are selected by cable size, for example, a 500 kcmil cable requires a 500 kcmil cable limiter. Their main use is to isolate faulted cables in circuits containing three or more parallel conductors per phase. They may be installed on the line side of the main service to provide short-circuit protection to the service conductors. This is especially important when service conductors are tapped from large low-voltage networks or from large low impedance transformers. Cable limiters have terminals which permit them to be installed in a variety of equipment. The most common configuration is the offset blade on one end and the crimp terminal on the other end. This permits the limiter to replace a cable terminal (lug). Applications: Service entrance conductors, between transformers or network bus and busway terminal boxes, large feeders with three or more conductors per phase. Features: Current-limiting characteristics provide protection to conductor insulation and reduce damage when faults occur. Properly applied cable limiters may permit the use of equipment with reduced withstand ratings. Wide variety of terminations and cable ratings permit use in almost every situation.

Contact for Pricing

Littelfuse FLSR600ID - FLSR600ID is a Class RK5 fuse with an ampere rating of 600 and knife-blade-style construction.
Littelfuse · FLSR Series

FLSR600ID

FLSR600.XXID


FLSR600ID is a Class RK5 fuse with an ampere rating of 600 and knife-blade-style construction.

Contact for Pricing

Littelfuse FLSR300ID - FLSR300ID is a Class RK5 fuse with an ampere rating of 300 and knife-blade-style construction.
Littelfuse · FLSR Series

FLSR300ID

FLSR300.XXID


FLSR300ID is a Class RK5 fuse with an ampere rating of 300 and knife-blade-style construction.

Contact for Pricing

Littelfuse FLSR03.2ID - FLSR03.2ID is a Class RK5 fuse with an ampere rating of 3.2 and cartridge-style construction.
Littelfuse · FLSR Series

FLSR03.2ID

FLSR03.2TXID


FLSR03.2ID is a Class RK5 fuse with an ampere rating of 3.2 and cartridge-style construction.

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Littelfuse FLSR450ID - FLSR450ID is a Class RK5 fuse with an ampere rating of 450 and knife-blade-style construction.
Littelfuse · FLSR Series

FLSR450ID

FLSR450.XXID


FLSR450ID is a Class RK5 fuse with an ampere rating of 450 and knife-blade-style construction.

Contact for Pricing

Littelfuse FLSR.500ID - FLSR.500ID is a Class RK5 fuse with an ampere rating of 0.5 and cartridge-style construction.
Littelfuse · FLSR Series

FLSR.500ID

FLSR.500TXID


FLSR.500ID is a Class RK5 fuse with an ampere rating of 0.5 and cartridge-style construction.

Contact for Pricing

Littelfuse FLSR1.12ID - FLSR1.12ID is a Class RK5 fuse with an ampere rating of 1.125 and cartridge-style construction.
Littelfuse · FLSR Series

FLSR1.12ID

FLSR1.12TXID


FLSR1.12ID is a Class RK5 fuse with an ampere rating of 1.125 and cartridge-style construction.

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Littelfuse FLSR250ID - FLSR250ID is a Class RK5 fuse with an ampere rating of 250 and knife-blade-style construction.
Littelfuse · FLSR Series

FLSR250ID

FLSR250.XXID


FLSR250ID is a Class RK5 fuse with an ampere rating of 250 and knife-blade-style construction.

Contact for Pricing

Littelfuse FLSR01.6ID - FLSR01.6ID is a Class RK5 fuse with an ampere rating of 1.6 and cartridge-style construction.
Littelfuse · FLSR Series

FLSR01.6ID

FLSR01.6TXID


FLSR01.6ID is a Class RK5 fuse with an ampere rating of 1.6 and cartridge-style construction.

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Littelfuse FLSR045ID - FLSR045ID is a Class RK5 fuse with an ampere rating of 45 and cartridge-style construction.
Littelfuse · FLSR Series

FLSR045ID

FLSR045.TXID


FLSR045ID is a Class RK5 fuse with an ampere rating of 45 and cartridge-style construction.

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Littelfuse FLSR100ID - FLSR100ID is a Class RK5 fuse with an ampere rating of 100 and knife-blade-style construction.
Littelfuse · FLSR Series

FLSR100ID

FLSR100.VXID


FLSR100ID is a Class RK5 fuse with an ampere rating of 100 and knife-blade-style construction.

Contact for Pricing

Minimum Qty: 5

Multiplier: 5

*Contact for lower quantities*

Littelfuse FLSR007ID - FLSR007ID is a Class RK5 fuse with an ampere rating of 7 and cartridge-style construction.
Littelfuse · FLSR Series

FLSR007ID

FLSR007.TXID


FLSR007ID is a Class RK5 fuse with an ampere rating of 7 and cartridge-style construction.

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Showing 1657-1668 of 3,038 results