Fuse RF - Class H - Fast-Acting Link 250VAC 50A

Fuse RFS - Class H - Fast-Acting Link 600VAC 20A

Fuse RFS - Class H - Fast-Acting Link 600VAC 90A

Fuse RFS - Class H - Fast-Acting Link 600VAC 300A

OTN Fuse OT - Class K5 - Fast-Acting 250VAC 20A Ferrule Amp-Trap®

Fuse A4J - Class J - Fast-Acting 600VAC 300VDC 200A Blade EI Indicator Amp-Trap®

The NH system is classified among plug-in fuse systems and is composed of: • fuse-base (possibly including terminal covers and phase barriers) • fuse-link with blade contact • fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type gG NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. 500 Volts 500 amps gG NH4 series.

NH solid links have a standard design. The current carrying parts are made of silver plated copper. It's also possible to get nickel plated design on request. The synthetic parts for insulated tags are in accordance with VDE 0636/DIN 57635 NH1 series.

The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. The system is the most modern of the screw systems and designed for 400VAC/250VDC networks. The D0 fuse range comprises the standardized fuse sizes D01, D02 and D03. The range of applications for D0 fuse-links for general application is the protection of cables and power lines. They limit and cut off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D0 fuse-links gG also protect equipments and installations against dynamic effects of high short circuit currents. 400 Volts D01 locking screw cap (for industry only) .

The NH system is classified among plug-in fuse systems and is composed of: • fuse-base (possibly including terminal covers and phase barriers) • fuse-link with blade contact • fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type gG NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. NH pulling handle with cuff .

VERY FAST-ACTING CERAMIC M-PACK 12A. The 3AB Very Fast-Acting Fuse for protection of Silicon Controlled Rectifiers and similar solid-state devices. Features: In accordance with UL Standard 248-14. Available in cartridge format only. RoHS compliant and Lead-free.

Perfect for use in lighting systems, this 300 VAC time delay fuse is designed to handle ballast transformer in-rush currents.