Category 6A cable shall be constructed of 23 AWG copper conductorswith FEP insulation. The copper conductors shall be twisted in pairs andseparated by a cross-divider. All four pairs shall be surrounded by a nonconductiveAXT barrier tape and a flame retardant PVC (CMP) jacket.

Category 6A cable shall be constructed of 23 AWG copperconductors with FEP insulation. The copper conductors shall betwisted in pairs and separated by an integrated pair separator.All four pairs shall be surrounded by an overall metallic foil shieldwithin a flame retardant PVC (CMP) jacket. The TX6A ShieldedCopper Cable must be installed as part of a complete TX6AShielded Copper Cabling System to achieve 10GBASE-T certifiedperformance.

Category 6 cable shall exceed the ANSI/TIA-568.2-D and IEC61156-5 Category 6 component standards. The conductorsshall be 23 AWG construction with FEPor polyolefin insulation.The copper conductors shall be twisted in pairs, separated bya cross-divider and covered by a low smoke, flame-retardant(CMP) jacket.

Category 6 cable shall exceed the ANSI/TIA-568.2-D and IEC61156-5 Category 6 component standards. The conductorsshall be 23 AWG construction with FEPor polyolefin insulation.The copper conductors shall be twisted in pairs, separated bya cross-divider and covered by a low smoke, flame-retardant(CMP) jacket.

Category 6 cable shall exceed the ANSI/TIA-568.2-D and IEC61156-5 Category 6 component standards. The conductorsshall be 23 AWG construction with FEPor polyolefin insulation.The copper conductors shall be twisted in pairs, separated bya cross-divider and covered by a low smoke, flame-retardant(CMP) jacket.

Category 6A OSP cable shall meet the ANSI/TIA-568.2-D Category 6Acomponent Standard. The conductors shall be 23 AWG with polyolefininsulation. The cable shall have a gel-filled construction to prevent moisturemigration in underground and wet applications and a wide temperaturerange for extreme weather environments. The copper conductors shall betwisted in pairs, separated by a pair separator, covered with an overall foilshield and a UV and abrasion-resistant polyethylene (PE) jacket.

Category 6A cable shall be constructed of 23 AWG copperconductors with polyolefin insulation. The copper conductorsshall be twisted in pairs and separated by an integrated pairseparator. All four pairs shall be surrounded by an overall metallicfoil shield within a flame retardant PVC (CMR) jacket. The TX6AShielded Copper Cable must be installed as part of a completeTX6A Shielded Copper Cabling System to achieve 10GBASE-Tcertified performance.

Category 6A cable shall be constructed of 23 AWG copperconductors with polyolefin insulation. The copper conductorsshall be twisted in pairs and separated by an integrated pairseparator. All four pairs shall be surrounded by an overall metallicfoil shield within a flame retardant PVC (CMR) jacket. The TX6AShielded Copper Cable must be installed as part of a completeTX6A Shielded Copper Cabling System to achieve 10GBASE-Tcertified performance.

Category 6A cable shall be constructed of 23 AWG copperconductors with polyolefin insulation. The copper conductorsshall be twisted in pairs and separated by an integrated pairseparator. All four pairs shall be surrounded by an overall metallicfoil shield within a flame retardant PVC (CMR) jacket. The TX6AShielded Copper Cable must be installed as part of a completeTX6A Shielded Copper Cabling System to achieve 10GBASE-Tcertified performance.

Category 6A cable shall be constructed of 23 AWG copperconductors with polyolefin insulation. The copper conductorsshall be twisted in pairs and separated by an integrated pairseparator. All four pairs shall be surrounded by an overall metallicfoil shield within a flame retardant PVC (CMR) jacket. The TX6AShielded Copper Cable must be installed as part of a completeTX6A Shielded Copper Cabling System to achieve 10GBASE-Tcertified performance.

Category 6A cable shall be constructed of 23 AWG copperconductors with polyolefin insulation. The copper conductorsshall be twisted in pairs and separated by an integrated pairseparator. All four pairs shall be surrounded by an overall metallicfoil shield within a flame retardant PVC (CMR) jacket. The TX6AShielded Copper Cable must be installed as part of a completeTX6A Shielded Copper Cabling System to achieve 10GBASE-Tcertified performance.

Category 6A cable shall be constructed of 23 AWG copperconductors with polyolefin insulation. The copper conductorsshall be twisted in pairs and separated by an integrated pairseparator. All four pairs shall be surrounded by an overall metallicfoil shield within a flame retardant PVC (CMR) jacket. The TX6AShielded Copper Cable must be installed as part of a completeTX6A Shielded Copper Cabling System to achieve 10GBASE-Tcertified performance.