QS 9FT/2.7M YLW BOOTED C6A STP

Category 6 cable shall meet ANSI/TIA-568-2.D Category 6 componentStandard. The conductors shall be 22 AWG construction with FEPinsulation. The copper conductors shall be twisted in pairs, separatedby tape divider, and covered by a low smoke, flame-retardant (CMP)PVC jacket. Provides less voltage drop, increased current carryingcapacity and reduced heat generation for PoE applications. Thecable shall exceed the 100-meter distance for security, ICT, buildingautomation, and IoT applications.

Category 6 cable shall meet ANSI/TIA-568-2.D Category 6 componentStandard. The conductors shall be 22 AWG construction with FEPinsulation. The copper conductors shall be twisted in pairs, separatedby tape divider, and covered by a low smoke, flame-retardant (CMP)PVC jacket. Provides less voltage drop, increased current carryingcapacity and reduced heat generation for PoE applications. Thecable shall exceed the 100-meter distance for security, ICT, buildingautomation, and IoT applications.

Category 6 cable shall meet ANSI/TIA-568-2.D Category 6 componentStandard. The conductors shall be 22 AWG construction with FEPinsulation. The copper conductors shall be twisted in pairs, separatedby tape divider, and covered by a low smoke, flame-retardant (CMP)PVC jacket. Provides less voltage drop, increased current carryingcapacity and reduced heat generation for PoE applications. Thecable shall exceed the 100-meter distance for security, ICT, buildingautomation, and IoT applications.

Category 6A cable shall be constructed of 23 AWG copperconductors with FEP insulation. The copper conductors shall betwisted in pairs and separated by an integrated pair separator.All four pairs shall be surrounded by an overall metallic foil shieldwithin a flame retardant PVC (CMP) jacket. The TX6A ShieldedCopper Cable must be installed as part of a complete TX6AShielded Copper Cabling System to achieve 10GBASE-T certifiedperformance.

Category 6A cable shall be constructed of 23 AWG copperconductors with FEP insulation. The copper conductors shall betwisted in pairs and separated by an integrated pair separator.All four pairs shall be surrounded by an overall metallic foil shieldwithin a flame retardant PVC (CMP) jacket. The TX6A ShieldedCopper Cable must be installed as part of a complete TX6AShielded Copper Cabling System to achieve 10GBASE-T certifiedperformance.

Category 6A cable shall be constructed of 23 AWG copperconductors with FEP insulation. The copper conductors shall betwisted in pairs and separated by an integrated pair separator.All four pairs shall be surrounded by an overall metallic foil shieldwithin a flame retardant PVC (CMP) jacket. The TX6A ShieldedCopper Cable must be installed as part of a complete TX6AShielded Copper Cabling System to achieve 10GBASE-T certifiedperformance.

Category 6A cable shall be constructed of 23 AWG copperconductors with FEP insulation. The copper conductors shall betwisted in pairs and separated by an integrated pair separator.All four pairs shall be surrounded by an overall metallic foil shieldwithin a flame retardant PVC (CMP) jacket. The TX6A ShieldedCopper Cable must be installed as part of a complete TX6AShielded Copper Cabling System to achieve 10GBASE-T certifiedperformance.

Category 6A cable shall be constructed of 23 AWG copper conductorswith FEP insulation. The copper conductors shall be twisted in pairs andseparated by a cross-divider. All four pairs shall be surrounded by a nonconductiveAXT barrier tape and a flame retardant PVC (CMP) jacket.

Category 6A cable shall be constructed of 23 AWG copperconductors with FEP insulation. The copper conductors shall betwisted in pairs and separated by an integrated pair separator.All four pairs shall be surrounded by an overall metallic foil shieldwithin a flame retardant PVC (CMP) jacket. The TX6A ShieldedCopper Cable must be installed as part of a complete TX6AShielded Copper Cabling System to achieve 10GBASE-T certifiedperformance.

Category 6 cable shall exceed the ANSI/TIA-568.2-D and IEC61156-5 Category 6 component standards. The conductorsshall be 23 AWG construction with FEPor polyolefin insulation.The copper conductors shall be twisted in pairs, separated bya cross-divider and covered by a low smoke, flame-retardant(CMP) jacket.

Category 6 cable shall exceed the ANSI/TIA-568.2-D and IEC61156-5 Category 6 component standards. The conductorsshall be 23 AWG construction with FEPor polyolefin insulation.The copper conductors shall be twisted in pairs, separated bya cross-divider and covered by a low smoke, flame-retardant(CMP) jacket.