3ft (0.9m) TAA-Compliant F-Series Cat5e Snagless Shielded (STP) Network Cable - Black - CG43437

6in (0.15m) TAA-Compliant F-Series Cat6 Snagless Unshielded (UTP) Network Cable - Black - CG43464

6ft (1.8m) TAA-Compliant F-Series Cat6a Snagless Shielded (STP) Network Cable - Green - CG43860

7ft (2.1m) TAA-Compliant F-Series Cat6a Snagless Shielded (STP) Network Cable - Green - CG43861

1000ft (304.8m) TAA-Compliant Cat6 Bulk Unshielded (UTP) Ethernet Network Cable with Stranded Conductors In-Wall CM-Rated - Blue - CG56047

The TX6000 Enhanced Category 6 U/UTP Copper Cable is constructed of 23 AWG conductors with FEP/polyolefin insulation. The copper conductors are twisted in pairs, separated by a cross-divider and covered by a low smoke, flame-retardant (CMP) black jacket supplied 305m (1000 ft.) in a reel in a carton. The cable has been tested as part of the TX6000 Enhanced Copper Cabling System and exceeds the ANSI/TIA-568.2-D and ISO 11801 Class E electrical channel requirements with guaranteed headroom.

The TX6000 Enhanced Category 6 U/UTP Copper Cable is constructed of 23 AWG conductors with FEP/polyolefin insulation. The copper conductors are twisted in pairs, separated by a cross-divider and covered by a low smoke, flame-retardant (CMP) intl. gray jacket supplied 305m (1000 ft.) in a reel in a carton. The cable has been tested as part of the TX6000 Enhanced Copper Cabling System and exceeds the ANSI/TIA-568.2-D and ISO 11801 Class E electrical channel requirements with guaranteed headroom.

Category 6A cable shall be constructed of 23 AWG copperconductors with FEP insulation. The copper conductors shall betwisted in pairs and separated by an integrated pair separator.All four pairs shall be surrounded by an overall metallic foil shieldwithin a flame retardant PVC (CMP) jacket. The TX6A ShieldedCopper Cable must be installed as part of a complete TX6AShielded Copper Cabling System to achieve 10GBASE-T certifiedperformance.

Category 6A cable shall be constructed of 23 AWG copper conductorswith FEP insulation. The copper conductors shall be twisted in pairs andseparated by a cross-divider. All four pairs shall be surrounded by a nonconductiveAXT barrier tape and a flame retardant PVC (CMP) jacket.

Two Category 6A cables shall meet the ANSI/TIA-568.2-DCategory 6A and IEC 61156-5 component standards. Theconductors shall be 23 AWG insulated with foamed PE andHDPE. The copper conductors shall be twisted in pairs,separated by a cross divider with an overall AXT barrier tapeand covered by a flame retardant PVC (CMR) jacket in analuminum interlock armor with an overall flame retardant PVC(CMR) jacket.

MRP31.0 Modbus RTU Interface

The TX6000 Cat 6 U/UTP Copper Cable is constructed of 23 AWG copper conductors with HDPE insulation. The conductors are twisted in pairs and separated by a cross divider and covered by a covered by a LSFRZH jacket. The white, (Cca-s1a,d1,a1) cable is supplied 1,000 feet (305 meters) to a reel.