Hammer Drive nail-in anchors for light duty concrete, solid brick, or block. The anchor body is formed from corrosion resistant Zamac alloy with a zinc plated carbon steel drive screw. It is a removable anchor with a Philips type head and screw thread for use in concrete, block, brick, or stone. Size is 1/4 x 1 with a minimum embedment depth of 3/4 inch.

Hammer Drive nail-in anchors for use in concrete, block, brick, or stone. They have a Zamac alloy body with a zinc plated carbon steel drive screw. This light-duty anchor is sized 1/4 x 1-1/4 in. with a 1/4 in. drill diameter and 7/8 in. minimum embedment depth.

Hammer drive nail-in anchors for use in concrete, block, brick, or stone. They have a Zamac alloy body with a zinc plated carbon steel drive screw. Size is 1/4 x 1-1/2 in., with a 1/4 in. drill diameter and 1-1/8 in. minimum embedment depth.

Hammer drive anchors for light-duty fastening in solid concrete, solid brick, block, or masonry walls. Made of zinc alloy with a zinc-plated finish. Size is 1/4 in. x 1-1/4 in., with a 1/4 in. drill size, 0.250 in. diameter, 1.250 in. length, 0.875 in. minimum embedment depth, and 0.547 in. head diameter.

A general purpose hammer drive nail expansion anchor for use in concrete, block, brick, and stone. It has a Zamac zinc alloy body with a steel nail and a zinc finish. The anchor measures 3/16 inch diameter by 7/8 inch length and requires a 3/16 inch drill size with 1-1/8 inch minimum embedment depth.

Hammer drive anchors for light-duty fastening in concrete, solid brick, block, or masonry walls. Made of zinc alloy with a zinc plated finish. The anchor size is 1/4 in. x 1-1/2 in., with a 1/4 in. drill size and 1.000 in. minimum embedment depth.

A two-piece hammer drive anchor with a tubular stem and a nail driven through the hollow center of the stem. It is made of zinc alloy with a zinc-plated finish. The anchor measures 1/4 in diameter and 3/4 in length and is designed for attaching termination bar to solid concrete, solid brick, block, or masonry walls.

Hammer drive anchors for light-duty fastening in solid concrete, solid brick, block, or masonry walls. They are made of zinc alloy with a zinc plated finish. This size is 1/4" x 1" with a 1/4" drill size, 0.750" minimum embedment depth, and a mushroom head.

Hammer Drive Anchors for light-duty fastening in concrete, solid brick, block, or masonry walls. They are made of zinc alloy with a zinc plated finish. The anchor size is 1/4 in. x 2 in., with a 1/4 in. drill size, 1.000 in. minimum embedment depth, 0.250 in. diameter, and 0.547 in. head diameter.

This is a hammer drive anchor for attaching termination bar to solid concrete, solid brick, block, or masonry walls. The anchor material is nylon and the nail material is steel with a zinc-plated finish. It is sized 1/4" x 1-1/2" with a mushroom head and is removable.

Nylon nail-in anchors with a mushroom head for light-duty fastening. They are designed for attaching termination bar to solid concrete, solid brick, block, or masonry walls. The anchor material is nylon and the nail material is steel with a zinc-plated finish.

Nylon hammer drive anchors designed for attaching termination bar to solid concrete, solid brick, block, or masonry walls. They have a mushroom head and are described as light duty and removable. The anchor is 1/4" x 3" with a 1/4" drill size and a 1.250" minimum embedment depth.