Showing 25-36 of 50 results
Hammer drive anchors for light-duty fastening in solid concrete, solid brick, block, or masonry walls. They are made of zinc alloy with a zinc plated finish. The anchor size is 1/4" x 3/4" and it has a mushroom head.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Hammer drive anchors for light-duty fastening in concrete, solid brick, block, or masonry walls. They are made of zinc alloy with a zinc plated finish. The listed size is 1/4" x 1", with a 1/4" drill size, 0.250" diameter, 1.000" length, 0.750" minimum embedment depth, and a mushroom head with 0.547" head diameter.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Hammer drive anchors for light-duty fastening in concrete, solid brick, block, or masonry walls. Made of zinc alloy with a zinc-plated finish. Size is 1/4 in. x 1-1/2 in., with a 1/4 in. drill size, 0.250 in. diameter, 1.500 in. length, 1.000 in. minimum embedment depth, and 0.547 in. head diameter.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Hammer drive anchors for attaching termination bar to solid concrete, solid brick, block, or masonry walls. They are made of zinc alloy with a zinc plated finish. The size is 1/4 in. x 2 in., with a 1/4 in. drill size, 0.547 in. head diameter, mushroom head, and 1.000 in. minimum embedment depth.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A rod-coupling drive anchor for rod hanging applications. It is made of carbon steel with a zinc plated finish and is designed for use in concrete, block, or stone. The anchor has a 1/4"-20 internal thread, a 3/16" drill size, and a 1/4 x 1-7/8 size.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
Hammer Drive nail-in anchors for light duty concrete, solid brick, or block. The body is formed from corrosion resistant Zamac alloy with a zinc plated carbon steel drive screw. Designed as a removable anchor with a Phillips type head and screw thread for use in concrete, block, brick, or stone. Minimum embedment depth is 1-7/8 in.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
Hammer Drive nail-in anchors for use in concrete, block, brick, or stone. They have a Zamac alloy body with a zinc plated carbon steel drive screw. Size is 1/4 x 2-1/4 in., with a minimum embedment depth of 1-3/4 in. for light-duty anchoring in concrete, concrete masonry, brick masonry, and stone.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
A 1/4 x 1 inch ZAMAC hammer screw anchor. It has a Phillips head and a Zamac alloy body with a carbon steel drive screw. Packaged 100 per box.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Hammer Drive nail-in anchors for use in concrete, block, brick, or stone. The body is formed from corrosion-resistant Zamac alloy with a zinc plated carbon steel drive screw. This size is 1/4 x 2 in. and has a minimum embedment depth of 1-3/8 in. Designed as a removable anchor with a Phillips head drive pin.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 25-36 of 50 results