Showing 13-24 of 50 results
Hammer drive anchors for attaching termination bar to solid concrete, solid brick, block, or masonry walls. They are made of zinc alloy with a zinc plated finish. The anchor size is 3/16 in. x 7/8 in., with a 3/16 in. drill size, 0.188 in. diameter, 0.750 in. length, 0.406 in. head diameter, mushroom head, and 0.625 in. minimum embedment depth.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Hammer drive anchors for light duty use in concrete, solid brick, block, or masonry walls. They are made of zinc alloy with a zinc plated finish and have a mushroom head. The anchor size is 1/4 in. x 1-1/4 in., with a 1/4 in. drill size and 0.875 in. minimum embedment depth.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A 1/4 tie wire anchor for suspended ceilings. It is made of carbon steel with a zinc plated finish and is designed for use in concrete, block, or stone. The anchor has a 1/4 in drill size, a 9/32 tie wire hole, and a 1-1/8 in minimum embedment depth. Size is listed as 1/4 x 1-3/4.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Metal Hammer Drive Nail-In Anchor, 1/4 in. diameter, 3/4 in. length
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Metal Hammer Drive Nail-In Anchor, 1/4 in. diameter, 1 in. length
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Metal Hammer Drive Nail-In Anchor, 1/4 in. diameter, 2 in. length
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Metal Hammer Drive Nail-In Anchor, 1/4 in. diameter, 1-1/2 in. length
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Metal Hammer Drive Nail-In Anchor, Stainless Steel, 1/4 in. diameter, 1-1/2 in. length, 100 per pack, 1/4 in. hole size
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Hammer drive anchors for attaching termination bar to solid concrete, solid brick, block, or masonry walls. They are made of zinc alloy with a zinc plated finish. The size is 1/4 in. x 2 in., with a 1/4 in. drill size, 0.547 in. head diameter, mushroom head, and 1.000 in. minimum embedment depth.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Hammer drive anchors for light-duty fastening in solid concrete, solid brick, block, or masonry walls. Made of zinc alloy with a zinc-plated finish. Size is 1/4 in. x 1-1/4 in., with a 1/4 in. drill size, 0.250 in. diameter, 1.250 in. length, 0.875 in. minimum embedment depth, and 0.547 in. head diameter.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A general purpose hammer drive nail expansion anchor for use in concrete, block, brick, and stone. It has a Zamac zinc alloy body with a steel nail and a zinc finish. The anchor measures 3/16 inch diameter by 7/8 inch length and requires a 3/16 inch drill size with 1-1/8 inch minimum embedment depth.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Hammer drive anchors for light-duty fastening in concrete, solid brick, block, or masonry walls. Made of zinc alloy with a zinc plated finish. The anchor size is 1/4 in. x 1-1/2 in., with a 1/4 in. drill size and 1.000 in. minimum embedment depth.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 13-24 of 50 results