An SDS rotary/hammer carbide masonry drill bit with a 5/16" fractional size. It is made of steel with a polished finish and a tungsten carbide point. The bit has a 4-Plus drill point, a 4" flute length, and an overall length of 6-1/4".

An SDS rotary/hammer carbide masonry drill bit with a 1/4" fractional size. It is made of steel with a polished finish and a tungsten carbide point. The bit has a 4-Plus drill point, a 4" flute length, and a 6-1/4" overall length.

Rotary/percussion carbide drill bit with an exclusive RamTip design for a secure fit in rotary and percussion drills. It is made of steel with a plain finish and a tungsten carbide point. The drill point is 3/4 inch, with a 4 inch flute length, 6 inch overall length, and 1/2 inch shank diameter.

An SDS rotary/hammer carbide masonry drill bit with a 1/2" fractional size. It is made of steel with a polished finish and a tungsten carbide point. The bit has a 4-Plus drill point, a 4" flute length, and an overall length of 6-3/4".

This is a 3/8-inch SDS rotary/hammer carbide masonry drill bit. It is made of steel with a polished finish and a tungsten carbide point. The bit has a 4-Plus drill point, a 4-inch flute length, and an overall length of 6-1/4 inches.

An SDS rotary/hammer carbide masonry drill bit with a 1/2" fractional size. It is made of steel with a polished finish and a tungsten carbide point. The bit has a 4-Plus drill point, a 4" flute length, and an overall length of 6-3/4".

This is a Relton SDS rotary/hammer carbide masonry drill bit. It has a steel body with a heat-treated finish and an SDS shank. The bit diameter is 0.750 inch, the overall length is 8.000 inches, and the drill size is 3/4 inch x 8 inch.

A SDS rotary/hammer carbide masonry drill bit with a 3/16" fractional size. It has a steel body with a polished finish and a tungsten carbide point. The drill bit measures 4-1/2" overall length with a 2-1/2" flute length.

An SDS rotary/hammer carbide masonry drill bit. It is made of steel with a polished finish and a tungsten carbide point. The bit has a 3/8 in. fractional size, 12 in. flute length, and 14 in. overall length.

An SDS shank hammer bit for masonry drilling. It is made of steel with a heat-treated finish. The bit diameter is 0.250 in and the overall length is 8.000 in.

Straight-shank masonry bit designed for use in lightweight rotating-vibrating hammers and standard drill motors as a rotary bit. It is made of steel and features a Ram Tip™. The bit measures 3/8 in diameter with an overall length of 20 in.

Straight-shank masonry bit designed for use in lightweight rotating-vibrating hammers and standard drill motors as a rotary bit. It is made of steel and features a Ram Tip. The bit diameter is 0.500 in with an overall length of 20.000 in and a shank size of 0.375 in.