6-32 X 3 Truss Hd Phil/Slot (combo) M/S St-Zn

M4 x 16mm Flat Hd Star W/Pin M/S S/S

M5 x 30mm Flat Hd Star W/Pin M/S S/S

1/4-20 x 1-1/2 RH CD MS St-Zn

1/4-20 x 4 RH CD MS St-Zn

This is a steel machine screw sized 10-32 x 2 in with a round head and combo slotted/Phillips drive. It has a zinc plated finish and a silver head color. The screw is intended for use with a pre-tapped hole or with a nut.

Machine screw with a 10-32 thread size and 1-1/4 in. length. It is made of steel with a zinc plated finish and a round head. The screw has a slotted/Phillips combo drive and is intended for use with a pre-tapped hole or with a nut.

Lead machine screw anchor in a jar package. It is made of lead and has a 1/2"-13 internal thread with a 7/8" drill size. The anchor measures 0.375" in diameter and requires a minimum embedment depth of 1-1/2". Ultimate tensile strength is listed as 2690 lbs based on 4000 psi concrete.

A machine screw with a flat head and spanner drive, sized 1/4-20 by 2 inches. It is made of stainless steel with a stainless finish and is intended for use with a pre-tapped hole or with a nut. The screw has 2A external threads, a #3 driver size, a head height of 0.153 inch, and a head diameter of 0.477 inch.

Tamperproof machine screws with a flat head and socket pin drive. Made from 18-8 stainless steel with a stainless finish for general atmospheric corrosion resistance. The screw size is #8 x 1/2 in with 2A external threads and 32 TPI. Head width is 0.374 in and head height is 0.095 in.

A machine screw with 10-32 size and 1/2 inch length. It is made of stainless steel and has 2A external threads. It is intended for use with a pre-tapped hole or with a nut.

Tamperproof machine screws with a flat head and Star Pin drive. Made from 18-8 stainless steel with a stainless finish for general atmospheric corrosion resistance. The screw size is #6 x 3/8 in with 2A external threads and 32 TPI.