This is a 10-32 x 1-1/2 inch machine screw with a round head and Phillips drive. It is made of 18-8 stainless steel. The screw is supplied in a jar.

This is a 10-32 x 1 inch machine screw with a round head and Phillips drive. It is made of 18-8 stainless steel. The sheet identifies it as a jar-pack item.

Machine Screw, #6-32 Size, 370 piece(s), Steel material, 1 per pack, including a(n) #6-32 Flat Head Slotted Drive Machine Screw and (30) 3 in. Machine Screw and (75) 1-1/4 in. Machine Screw, 50 x 1-1/2 in. Machine Screw and (40) 2 in. Machine Screw and (100) 3/4 in. Machine Screw, (75) 1 in. Machine Screw

Machine Screw Kit, #10-32 Size, 245 piece(s), Steel material, Round head, Phillips/Slotted drive type, Zinc finish, Plastic box material, including a(n) (75) 1/2 in. Machine Screw, (50) 3/4 in. Machine Screw, (40) 1 in. Machine Screw, (30) 1-1/4 in. Machine Screw, (25) 1-1/2 in. Machine Screw,(25) 2 in. Machine Screw

Round Head Slotted Machine Screw, Steel material, 3/8-16 in. Size, 5 in. length, Zinc Chromate finish, 50 per pack

Machine screw with a round head and Phillips/Slotted combo drive. It is made of steel with a zinc plated finish and is sized 3/8-16 by 3/4 in. The screw has 2A external threads and is intended for use with a pre-tapped hole or with a nut.

This is a steel machine screw sized 10-32 x 2 in with a round head and combo slotted/Phillips drive. It has a zinc plated finish and a silver head color. The screw is intended for use with a pre-tapped hole or with a nut.

Machine screw with a 10-32 thread size and 1-1/4 in. length. It is made of steel with a zinc plated finish and a round head. The screw has a slotted/Phillips combo drive and is intended for use with a pre-tapped hole or with a nut.

Lead machine screw anchor in a jar package. It is made of lead and has a 1/2"-13 internal thread with a 7/8" drill size. The anchor measures 0.375" in diameter and requires a minimum embedment depth of 1-1/2". Ultimate tensile strength is listed as 2690 lbs based on 4000 psi concrete.

A machine screw with a flat head and spanner drive, sized 1/4-20 by 2 inches. It is made of stainless steel with a stainless finish and is intended for use with a pre-tapped hole or with a nut. The screw has 2A external threads, a #3 driver size, a head height of 0.153 inch, and a head diameter of 0.477 inch.

Tamperproof machine screws with a flat head and socket pin drive. Made from 18-8 stainless steel with a stainless finish for general atmospheric corrosion resistance. The screw size is #8 x 1/2 in with 2A external threads and 32 TPI. Head width is 0.374 in and head height is 0.095 in.

A machine screw with 10-32 size and 1/2 inch length. It is made of stainless steel and has 2A external threads. It is intended for use with a pre-tapped hole or with a nut.