This is a 10-24 x 1/2 inch machine screw with a round head and slot drive. It is made of 18-8 stainless steel. The screw is specified on the sheet as RHMS SLOT 18-8 SS.

A machine screw with a round head and Phillips drive. It is made of 18-8 stainless steel and is intended for use with a pre-tapped hole or with a nut. The sheet lists the size as 1/4-20 x 3/4 in.

Tamperproof machine screws with a pan head and spanner drive. They are 10-24 by 2 inches and made of 18-8 stainless steel. Supplied in a jar of 100.

Lead machine screw anchor with a #10-24 size and internal threads. It is made of lead and includes a setting tool. The anchor has a 3/8" drill size, 1/2" thread length, 5/8" minimum embedment depth, and an ultimate tensile strength of 595 lbs based on 4000 psi concrete.

This is a machine screw with a straight shank and external threads, sized 8-32 x 1/2 in. It is made of stainless steel with a stainless finish and has a slotted round head. The screw measures 0.500 in long, with a head height of 0.113 in and a head diameter of 0.298 in.

A machine screw with external threads designed to go through a hole or pre-tapped nut to form a mating thread. It is made of stainless steel with a stainless finish and has a slotted round head. The screw size is #8-32 x 3/8 in, with a length of 0.250 in, thread size of 32 TPI, head height of 0.113 in, and head diameter of 0.298 in.

A machine screw with external threads designed to go through a hole or into a pre-tapped nut or thread. It is made of stainless steel with a stainless finish and has a slotted round head. The screw size is #8-32 x 3/4 in, with a length of 0.750 in and a thread size of 32 TPI.

A machine screw with external threads designed to go through a hole or into a pre-tapped nut or hole. It is made of stainless steel with a stainless finish. The screw is 1.000 in long and has a round head with a slotted drive.

A machine screw designed for use with a pre-tapped hole or with a nut. It is made of 18-8 stainless steel with a stainless finish. The screw is 6-32 x 1 in, with a flat head, Phillips drive, and #1 driver size.

This is a machine screw with a pan head and Phillips drive. It is made of 18-8 stainless steel with a stainless finish. The screw size is 10-32 x 3/4 in, with a 0.750 in length and 32 TPI external 2A threads.

A machine screw with a straight shank and external threads for use in a pre-tapped hole or nut. It is made of stainless steel with a stainless finish. The screw is 1.000 in long and has a round head with a slotted drive.

A machine screw with a straight shank and external threads designed to go through a hole or a pre-tapped nut. It is made of steel with a brass plated finish and a bronze head color. The screw is size #10-24 x 1/2 in, with a 0.500 in length, slotted drive, round head, 0.130 in head height, and 0.346 in head diameter.