Showing 2089-2100 of 2,470 results
This is a machine screw sized 10-24 and 2 inches long. It is made of steel with a zinc plated finish and has a flat head with a square drive. The screw is intended for use with a pre-tapped hole or with a nut.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screw with a round head and square/slotted combo drive. It is made of steel with a zinc plated finish and is sized 10-32 by 1/2 inch long. The screw has 2A external threads and is intended for use with a pre-tapped hole or with a nut.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screws for use with a pre-tapped hole or with a nut. They are steel with a zinc plated finish. This screw is 10-24 size and 1/2 in long, with a flat head and slotted drive.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screw for use with a pre-tapped hole or with a nut. It is made of steel with a zinc plated finish. The screw is 8-32 x 2 in., with a flat head and Phillips drive.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a machine screw with a truss head and Phillips drive. It is made of steel with a zinc plated finish. The screw size is #8-32 x 2 in., with a length of 2.000 in., thread size 32, head height 0.095 in., and head diameter 0.374 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screw for use with a pre-tapped hole or with a nut. It is made of steel with a zinc plated finish. The screw is 1.500 in long and has an 8-32 size with a flat head and Phillips drive.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
These are brass machine screws with a round head and slotted drive. The screws are sized #10 x 3/8 in, with a length of 0.375 in and 2A external threads, thread size 32. They have a head width of 0.354 in and a head height of 0.096 in. They are intended for use with a pre-tapped hole or with a nut.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screws for use with a pre-tapped hole or with a nut. They are made of steel with a zinc plated finish. This screw is 10-24 size and 1 inch long, with a flat head and slotted drive.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A machine screw sized #10-24 x 2 in with a round head and slotted drive. It is made of steel with a brass plated finish and a bronze head color. The screw has a head height of 0.130 in and a head diameter of 0.346 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screw for use with a pre-tapped hole or with a nut. It is made of steel with a zinc plated finish. The screw is 1/4"-20 size and 1/2" long, with a flat head and slotted drive.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screw with a round head and slotted drive. Made of brass with a copper-colored head finish. Sized 1/4"-20 x 1-1/4" for use with a pre-tapped hole or with a nut.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
These are machine screws with a round head and slotted drive. They are made of brass and have a length of 0.750 in. The screws are size 8-32 and are intended for use with a pre-tapped hole or with a nut.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 2089-2100 of 2,470 results