Showing 1849-1860 of 2,470 results
Machine screw with a 6-32 thread size and 1-1/2 in length. It has a truss head, Phillips/Slotted combo drive, and a zinc plated finish. The screw is made of steel and is intended for use with a pre-tapped hole or with a nut.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screws made of steel with a zinc plated finish. They are 6-32 x 2 in size, with a truss head and Phillips/Slotted combo drive. The sheet lists a #2 Phillips driver size and a silver head color. These screws are intended for use with a pre-tapped hole or with a nut.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screws made of steel with a zinc plated finish. They are 10-24 x 2 in size with a round head and slotted/Phillips combo drive. The sheet lists a 2A external thread, 24 threads per inch, and a silver head color.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screw for use with a pre-tapped hole or with a nut. It is made of steel with a zinc plated finish. The screw is 1-1/2 in. long and has a 3/8-16 size with a round head and Phillips/Slotted combo drive.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screw for use with a pre-tapped hole or with a nut. It is made of steel with a zinc plated finish. The screw is 2 in long with 3/8-16 size, a round head, and a Phillips/Slotted combo drive.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screw with a 6-32 size and 1-1/4 in length. It is made of steel with a zinc plated finish and has a truss head with a Phillips/Slotted combo drive. The screw has a 2A external thread, 32 threads per inch, a 0.312 in head diameter, and a 0.080 in head height.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screw for use with a pre-tapped hole or with a nut. It is made of steel with a zinc plated finish. The screw is 6-32 size and 2-1/2 inches long, with a flat head and slotted drive.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screws form a fastening that is superior in strength to spaced thread screws. This screw is steel with a zinc plated finish and a truss head. It is sized 6-32 x 1 inch, with a 2A external thread and a Phillips/Slotted combo drive. It is for use with a pre-tapped hole or with a nut.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screw with a truss head and Phillips/Slotted combo drive. Made of steel with a zinc plated finish and silver head color. Size is 6-32 x 3/4 in., with 2A external thread, 32 threads per inch, 0.312 in. head diameter, and 0.080 in. head height. Intended for use with a pre-tapped hole or with a nut.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a machine screw with 1/4"-20 size and 2-1/2" length. It has a round head, Phillips/Slotted combo drive, and zinc plated finish. The screw is made of steel and is intended for use with a pre-tapped hole or with a nut.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screws for use with a pre-tapped hole or with a nut. They are steel with a zinc plated finish. The screws are 6-32 x 1-1/4 in, with a flat head and Phillips drive.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a machine screw for use with a pre-tapped hole or with a nut. It is made of steel with a zinc-plated finish. The screw is 6-32 x 1-1/2 in, with a flat head and Phillips drive.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 1849-1860 of 2,470 results