Showing 1417-1428 of 2,469 results
Machine screw for use with a pre-tapped hole or with a nut. It is steel with a zinc plated finish. The screw is 10-32 size and 2-1/2 inches long, with a flat head and slotted drive.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A machine screw with a straight shank and external threads for use with a pre-tapped hole or a nut. It is made of steel with a zinc plated finish. The screw is size 8-32 and measures 2 inches long, with a flat head and slotted drive.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
Machine screw made of steel with a zinc plated finish. It is 1/4"-20 size and 3" long, with a flat head and slotted drive. The screw has 2A external threads and is intended for use with a pre-tapped hole or with a nut.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a brass machine screw with a round head and slotted drive. It is sized 1/4-20 x 3/8 in and has 2A external threads with 20 TPI. The screw has a head width of 0.354 in and a head height of 0.096 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screw for use with a pre-tapped hole or with a nut. It is made of steel with a zinc plated finish and has a flat head with a slotted drive. The screw is 10-24 size and 3 inches long.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screw with a steel body and zinc plated finish. It is sized 6-32 x 4 in, with a truss head and Phillips/Slotted combo drive. The screw has a 2A external thread, 32 threads per inch, a 0.312 in head diameter, and a 0.080 in head height.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a steel machine screw with external 2A threads and a truss head. It is sized 6-32 x 3/4 in and has a Phillips/slotted combo drive with a #2 Phillips driver size. The finish is zinc plated and the head color is silver.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Machine screws for use with a pre-tapped hole or with a nut. They are steel with a zinc plated finish and a silver head color. The screws are 10-24 x 2 in with a truss head and Phillips/Slotted combo drive.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A machine screw with a straight shank and external threads for use with a pre-tapped hole or a nut. It is made of steel with a zinc plated finish. The screw is 6-32 size and 3 inches long, with a flat head and slotted drive.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A machine screw with external threads for use with a pre-tapped hole or a nut. It is made of steel with a zinc plated finish. The screw is 10-24 x 1/2 in with a round head and slotted/Phillips combo drive.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a steel machine screw sized 10-24 x 3 in with a round head and slotted/Phillips combo drive. It has a zinc plated finish and a silver head color. The screw has 2A external threads with 24 threads per inch and is intended for use with a pre-tapped hole or with a nut.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A machine screw with external 2A threads for use with a pre-tapped hole or a nut. It is made of steel with a zinc-plated finish. The screw size is 8-32 x 1/2 in and it has a round head with a slotted/Phillips combo drive.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 1417-1428 of 2,469 results