Showing 85-96 of 118 results
This is a 3/4 inch lock washer. It is made of silicon bronze and is specified as medium. The sheet lists it as supplied in a jar.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A split lock washer made of stainless steel with a stainless finish. It is a hardened, coiled circular washer designed to provide a hardened bearing surface and more uniform torque control and load distribution. The washer has a thickness of 0.094 in, an outside diameter of 0.680 in, and an inside diameter of 0.385 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a 5/8 inch split lock washer made of 18-8 stainless steel. It has a stainless finish and is intended to resist loosening caused by vibration and corrosion. The washer provides a hardened bearing surface for more uniform torque control and load distribution. Its listed dimensions are 0.156 inch thickness, 1.073 inch outside diameter, and 0.641 inch inside diameter.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a 3/4 inch lock washer in a medium split style. It is made of Type 316 stainless steel. The product is supplied in a jar.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a 1/4 inch split lock washer in medium split style. It is made of 316 stainless steel with a silver finish. The washer has a thickness of 0.062 inch, an outside diameter of 0.487 inch, and an inside diameter of 0.260 inch.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a 3/4 in. split lock washer made of stainless steel with a stainless finish. It is designed to apply greater bolt tension per unit of applied torque and resist loosening caused by vibration and corrosion. The washer provides a hardened bearing surface for more uniform torque control and load distribution.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A split lock washer made of 316 stainless steel with a stainless finish. It has a thickness of 0.031 in, an outside diameter of 0.250 in, and an inside diameter of 0.148 in. The washer is silver and is intended to provide a hardened bearing surface with more uniform torque control and load distribution.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
3/4 in lock washers with a medium split design. Made from 18-8 stainless steel and supplied in a jar. Intended for locking applications where a split lock washer is used.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A split lock washer made of 316 stainless steel with a stainless finish. It has a thickness of 0.109 in, an outside diameter of 0.776 in, and an inside diameter of 0.450 in. The washer is silver and is intended to provide a hardened bearing surface and resist loosening from vibration and corrosion.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a 7/16-inch lock washer with a medium split design. It is made of 18-8 stainless steel and supplied in a jar. The sheet identifies it as a locking washer for general fastening applications.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
ABB - Installation Products · SUPERSTRUT
E148-5/16EGC
Washer, Lock, Size 5/16 Inch, Electro-Galvanized Steel
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 85-96 of 118 results