Showing 349-360 of 384 results
A steel wire S-hook with blunt ends and single notches cut into the outer edge of the two ends. It is zinc plated steel and has an overall length of 2-1/4 in. It is designed to be used with other components to temporarily lift and/or suspend light weights.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
An S-hook designed to be used with other components to temporarily lift and/or suspend light weights. It is made of steel with a zinc-plated silver finish. The overall length is 1-1/2" and the working load limit is 71.3 lbs.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a 3-inch S-hook made of steel. It has a zinc-plated finish and a silver color. The hook is designed to be used with other components to temporarily lift and/or suspend light weights. Its working load limit is 253 lbs when closed on both ends so each leg touches the center wire.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
A steel wire S-hook with blunt ends and single notches cut into the outer edge of the two ends. It is made of zinc plated steel and has an overall length of 3/4 inch. Designed to be used with other components to temporarily lift and/or suspend light weights.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A steel wire S-hook with blunt ends and single notches cut into the outer edge of the two ends. It is zinc plated steel with a silver finish. Overall length is 1 inch. Designed to be used with other components to temporarily lift and/or suspend light weights.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
1-1/2 in. S-hook designed to be used with other components to temporarily lift and/or suspend light weights. The sheet title identifies it as Type 304 stainless steel. It has an overall length of 1-1/2 in. and a silver color.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a 1-1/2 inch S-hook for temporary lifting or suspending light weights when used with other components. The sheet title identifies it as Type 304 stainless steel, and the product is shown with a silver finish. It has an overall length of 1-1/2 inches.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
#12 screw hooks with zinc plated finish. They are made of steel and have an overall length of 1-11/16 inches. The opening size is 11/32 inch.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
#14 screw hooks with a zinc-plated finish. They are made of steel and have an overall length of 1-1/4 inches. The opening size is 9/32 inch.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
An S-Hook made of steel with a silver finish. The overall length is 1 inch. It is designed to be used with other components to temporarily lift and/or suspend light weights, and has a working load limit of 30 lbs when closed on both ends until each leg touches the center wire.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Steel S-hook with a silver finish. The overall length is 1-1/2 inches. It is designed to be used with other components to temporarily lift and/or suspend light weights.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
An S-hook designed to be used with other components to temporarily lift and/or suspend light weights. It is made of steel and has a silver finish. The overall length is 2-1/2 inches.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
Showing 349-360 of 384 results