Showing 1273-1284 of 1,420 results
Hex cap bolt made of Grade 5 steel with a zinc plated finish. It is 1-1/2 inches long and has 1/2-13 coarse threading. The bolt has a hex head with a 3/4 inch head width and 5/16 inch head height.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
Hex cap bolt made of Grade 2 steel. It is 3/8-16 x 3-1/2 in. long with coarse threads and a hex head. The bolt has a zinc plated finish and a silver head color.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
Hex cap bolt designed for insertion through holes in assembled parts and tightened or released by torquing a nut. It is made of Grade 2 steel with a zinc plated finish. The bolt size is 5/16-18 x 3/4 in, with a 1/2 in hex head and 13/64 in head height.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a hex tap bolt for use in drilled and tapped holes threaded full length. It is made of steel with a zinc plated finish. The bolt is 4.500 in long and sized 5/16-18 x 4-1/2 in, with a 0.313 in diameter and 18 threads per inch.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
Hex tap bolt for use in drilled and tapped holes which are threaded full length. It is made of steel with a zinc plated finish. The bolt is 5/16"-18 x 5-1/2" and has a hex head.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
This is a hex tap bolt for use in drilled and tapped holes threaded full length. It is made of steel with a zinc plated finish. The bolt is 4.500 in long and sized 3/8-16 x 4-1/2 in.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
This is a 5/16-18 x 1 inch hex head tap bolt. It is made of Grade 2 steel with a zinc plated finish. The bolt is fully threaded and has a hex head with a 1/2 inch head width and 13/64 inch head height.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a 5/8-11 x 2 inch hex head bolt, identified on the sheet as a Hex Tap Bolt. It is made of steel with a zinc plated finish and is fully threaded. The sheet states it is used in drilled and tapped holes which are threaded full length.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
Hex tap bolt for use in drilled and tapped holes threaded full length. It is made of steel with a zinc plated finish. The bolt is 1.000 in long and sized 5/8"-11 x 1" with a 0.625 in diameter.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
A hex tap bolt for use in drilled and tapped holes threaded full length. It is made of steel with a zinc plated finish. The bolt is 1.500 in long, size 5/8"–11 x 1-1/2", with a 0.625 in diameter and 11 threads.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
A hex tap bolt for use in drilled and tapped holes which are threaded full length. It is made of steel with a zinc plated finish. The bolt is 4.000 inches long and sized 5/8"-11 x 4".
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
Hex head cap screw with a 5/16-18 size and 2 inch length. It is made of Grade 5 steel and has a zinc plated finish. The sheet notes it is partial threaded and has a coarse thread type.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 1273-1284 of 1,420 results