Star tamperproof insert bit for tamper resistant Torx screws. It is made of steel with a hex shank and a 1/4" shank size. The bit has T20H and T25H tip sizes and an overall length of 2".

Hex Tek driver bits for #6-8 screw applications. They have a 1/4" drive size and a 6.000" overall length. The shank type is hex and the shank material is steel.

Hangerbolt driver used to install hangerbolts. It has a 3/8"-16 drive size and an overall length of 2.562". The shank is hexagonal and made of carbon steel. It features an easy-release ball bearing to prevent over-tightening.

Double-ended replacement bit for tamper resistant Torx screws. It is made of steel with a hex shank. The bit has T27H and T30H star pin tip sizes, an overall length of 2 inches, and a 1/4 inch shank size.

Hex driver bit for use with 1/4 in hex shank drivers. It is made of steel and has a magnetic tip to improve fastener retention. The bit is 6 in long and is sized for #14 screws.

Hex Tek driver bit for 1/4" hex drive applications. It is made of steel and has a magnetic tip. The sheet lists a length of 1-5/8" and a 1/4" drive size, with a 1" shank size.

A double-ended replacement bit for tamper resistant Torx® screws. It is made of steel and has a hex shank. The bit has a 1/4" shank size, 2" overall length, and tip sizes of 5/32" and 3/16".

Hex Tek driver bit made of steel with a magnetic tip. It has a 1/4" drive size and a 1" shank size. The listed length is 2-9/16". It is intended for 1/4" hex driver bit applications.

Hangerbolt driver used to install hangerbolts. It has a 1/4"-20 drive size and an overall length of 2.562". The shank is hexagonal and made of carbon steel. Features an easy-release ball bearing to prevent over-tightening.

BEAMCLMP C-CLAMP W/ LCKNUT 3/8

BEAMCLMP C-CLAMP W/ LCKNUT 3/8

Heavy Duty Hand Tool for Nylon Cable Ties 120-175 lbs. - .301-.345 Cable Tie Width