Showing 409-420 of 433 results
Flat cut washer for use around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. Made of 18-8 stainless steel with a silver finish. Fits 1/2 in bolt sizes and has an outside diameter of 1-1/4 in. Nominal thickness is 0.062 in (± 0.007) and inside diameter is .531 in.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Flat cut washer for use around a bolt or screw, between the fastener bearing surface and the attached part. Made of 18-8 stainless steel with a silver finish. It fits 1/4 in bolt sizes and has an outside diameter of 5/8 in, inside diameter of .281 in, and nominal thickness of 0.050 in (± .007).
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a 3/8-inch flat cut washer. It is made of 18-8 stainless steel. The sheet identifies it as a flat cut washer for general fastening use.
Contact for Pricing
Minimum Qty: 2500
Multiplier: 2500
*Contact for lower quantities*
3/8" USS flat washers in a jar. They are hot dipped galvanized for corrosion resistance. The sheet identifies the product as a flat cut washer with 3/8 inch size.
Contact for Pricing
Minimum Qty: 3220
Multiplier: 3220
*Contact for lower quantities*
Flat cut washers used to improve stress distribution and span large clearance holes. They are made of 18-8 stainless steel and are silver in color. The washer fits #6 bolt sizes and has an outside diameter of 0.390 inch, an inside diameter of 0.164 inch, and a nominal thickness of 0.065 inch.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
3/4 inch flat cut washers supplied in a jar. They are made of silicon bronze. The sheet identifies them as catalog number 42350J.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A flat cut washer for use around a bolt or screw between the fastener and the attached part. It is made of steel with a zinc plated finish. The washer has a thickness of 0.080 in, an outside diameter of 0.827 in, and an inside diameter of 0.419 in.
Contact for Pricing
A flat cut washer for use around a bolt or screw between the fastener bearing surface and the attached part. It is made of steel with a zinc plated finish. The washer has a thickness of 0.080 in, an outside diameter of 0.703 in, and an inside diameter of 0.359 in.
Contact for Pricing
Flat cut washers used to improve stress distribution and span large clearance holes. They are made of steel with a zinc plated finish and silver color. The washer has a 0.080" thickness, 0.640" outside diameter, and 0.296" inside diameter. Fits 1/4" bolt sizes.
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*
A 5/8 inch flat cut washer made from Type 316 stainless steel. It is supplied in a jar. The sheet identifies it as a flat washer product for general fastening use.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Flat cut washer designed to improve stress distribution and span large clearance holes. It is made of silicon bronze with a bronze finish and copper color. The washer has a thickness of 16, an outside diameter of 3/4", and an inside diameter of 5/16".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Flat cut washer made of 316 stainless steel with no additional finish. It is designed to improve stress distribution and span large clearance holes around a bolt or screw. The washer fits 5/8" bolt sizes and has a 1.750" outside diameter, 0.688" inside diameter, and 0.145" thickness.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 409-420 of 433 results