A flat cut washer for assembly around a bolt or screw, between the bearing surface of the fastener and the part to which it is attached. It is made of silicon with a bronze finish. The washer has a thickness of 0.034 in, an outside diameter of 0.375 in, and an inside diameter of 0.177 in.

This is a flat washer specified as 1" SAE. It is made of steel with a zinc plated finish and is silver in color. The washer has a thickness of 9/64", an outside diameter of 2.000", and an inside diameter of 1.062". It fits 1" bolt sizes.

Flat cut washer used to improve stress distribution and span large clearance holes. Made of steel with a zinc plated finish and silver color. It fits 5/16" bolt sizes and has an inside diameter of 0.344", thickness of 0.063", and outside diameter of 0.688".

Flat cut washer made of steel with a zinc plated finish. It is sized for 1/4" bolts and has an outside diameter of 0.640" and an inside diameter of 0.296". The washer thickness is 0.080". It is used to improve stress distribution and span large clearance holes in bolt or screw assemblies.

#8 flat cut washer made from Type 316 stainless steel. It is supplied in a jar. The sheet identifies it as a flat washer for general fastening use.

Insulation Piercing Washer, Outer Diameter 31.8mm (1.25 Inches), Inner Diameter 14.2mm (0.56 Inch), Stud Size 1/2 Inch, Copper Alloy, Tin Plated

Insulation Piercing Washer, Outer Diameter 17.3mm (0.68 Inch), Inner Diameter 6.9mm (0.27 Inch), Stud Size 1/4 Inch, Copper Alloy, Tin Plated

Insulation Piercing Washer, Outer Diameter 25.4mm (1.0 Inch), Inner Diameter 8.6mm (0.34 Inch), Stud Size 5/16 Inch, Copper Alloy, Tin Plated

Insulation Piercing Washer, Outer Diameter 35.6mm (1.4 Inches), Inner Diameter 17.3mm (0.68 Inch), Stud Size 5/8 Inch, Copper Alloy, Tin Plated

Washer, Flat, Size 5/8 Inch, Type 316 Stainless Steel

Washer, Flat, Size 1/2 Inch, Non-Metallic

Washer, Flat, Size 1/2 Inch, Steel