Showing 109-120 of 272 results
Contact for Pricing
Minimum Qty: 2500
Multiplier: 2500
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Octagonal Washer, Steel material, Zinc finish, 1/4 in. inside diameter, 1-1/2 in. outside diameter, 100 per pack, 1/4 in. fits bolt size
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Octagonal Washer, Steel material, Zinc finish, 3/8 in. inside diameter, 1-1/2 in. outside diameter, 100 per pack, 3/8 in. fits bolt size
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Fender washers sized 3/8 x 1-1/4 inch. They are made of Type 316 stainless steel. The sheet identifies them as fender washers supplied in a jar.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a fender washer with a 3/8 inch inside diameter and 2 inch outside diameter. It is made of 18-8 stainless steel with a stainless finish. The washer has a thickness of 0.047 inch to 0.080 inch and is used where an extra wide bearing surface is required.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Fender washer with an extra wide bearing surface for use where a wide load distribution area is required. It is made of 316 stainless steel with a stainless finish. The washer has a 1/4" inside diameter, 1-1/4" outside diameter, and thickness of 0.047"–0.080".
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A 5/16 x 1-1/2 inch fender washer made from Type 316 stainless steel. It is supplied in a jar. The sheet identifies it as catalog number 70740SS316J.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
This is a fender washer made from Type 316 stainless steel. It is sized 3/8 in inner diameter by 1-1/2 in outer diameter. The washer is intended for use where a wide bearing surface is needed.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
A 5/16 x 1-1/4 inch fender washer. It is made from 18-8 stainless steel. The sheet identifies it as a jar-pack product.
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*
Showing 109-120 of 272 results