Ultra-Lok 18-Volt Rechargeable, Portable Tool

HAND TOOL, NYL CABLE TIES 18-50LBS

3/8" Setting Tool For Internally Threaded Screw Anchor, 1/EA

1/2" Setting Tool For Internally Threaded Screw Anchor, 1/EA

1/4" Setting Tool For Internally Threaded Screw Anchor, 1/EA

A Sammys installation tool for Swivel Sammys 3/8" Rod SH-TEK 50 and SH-GST/CST 20. It is made of steel with a nickel finish. The tool has a #14 drive size and a hex shank type.

This is a cable tie gun used to quickly tension and cut off excess zip tie straps. It is intended for 18 to 40 lb nylon cable ties. The tool is made of steel and plastic.

HangerMate threaded rod anchoring system installation tool for 3/8-16 or 1/4-20 threaded rod. It is a HangerMate Driver (ZE 215) made of steel with a plain finish. The tool measures 2-7/16 in. long and 3/4 in. wide.

This is a HangerMate masonry install tool, a recessed drive sleeve used for installing HangerMate anchors. It is made of steel with a plain finish. The tool measures 5-1/2 inches long and 7/8 inch wide.

Socket driver for 3/8" threaded rod. It is an installation tool for installing rod hangers in concrete. The sheet identifies it as a vertical mount driver.

Rod Hanger Driver Wood/Steel

Socket driver for 1/4" rod hangers. It is an installation tool for installing rod hangers in concrete. The sheet identifies it as a vertical mount driver.