Our Cover Retention Straps secure your metal covers in place, preventing unathorized cable access in shared spaces. Our Tamper-Resitant design includes a speciality screw and bit hardware. Specifically designed to fit 6" H x 30" W basket. Recommended 6 straps per one 10 foot length of covered basket. Comes in Pre-Galvanized finish.

Our Cover Retention Straps secure your metal covers in place, preventing unathorized cable access in shared spaces. Our Tamper-Resitant design includes a speciality screw and bit hardware. Specifically designed to fit 4" H x 8" W basket. Recommended 6 straps per one 10 foot length of covered basket. Comes in Pre-Galvanized finish.

WBF2 is an electrical wire or cable raceway component. The sheet lists it with a height of 4-1/4 in and a width of 4-1/4 in. No material or finish is printed on the sheet.

Hammer On pipe sleeve positioner for use with Schedule #40, #80, and smaller wall thickness pipe. It is made of spring steel and is sized for sleeve diameters from 4 to 6 inches. The listed overall dimensions are 1-1/16 inch height, 1-1/4 inch width, and 1/2 inch depth.

The Wyr-Grid Trapeze Bracket is used in cable routing systems to support a 12 inch (304.8mm) wide Wyr-Grid Pathway using a pair of 0.5 inch (12mm) threaded rod drops. The bracket is 2.41 inches H x 16.5 inches L x 2.22 inches W (61.2mm x 419.1mm x 56.4mm). The hardware for attaching the bracket is sold separately. The Wyr-Grid Trapeze Bracket is sold in packages of one.

The black powder coated bracket is 2.41" (61.2 mm) high, 33" (838.2 mm) long, 2.04" (51.8 mm) wide, and 33" (838.2 mm) deep. It is designed to support a 30" (762 mm) wide Wyr-Grid Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod drops. The hardware for attaching the bracket to a threaded rod is sold separately. The black powder coated bracket comes in standard packages of one.

The flat, pre-galvanized metal liner in gray is 8.0" (203.2 mm) wide and 63" (1600.2 mm) long. It is used to provide a flat surface for routing cables on the Wyr-Grid pathway sections. It comes in standard packages of one.

The black powder coated trapeze bracket 0.72" (18.3 mm) high, 12.5" (317.5 mm) long, 2.04" (51.8 mm) wide, and 12.5" (317.5 mm) deep. It is used to support an 8" (203.2 mm) wide Wyr-Grid Pathway from the ceiling using a pair of 1/2" or (12 mm) threaded rod drops. The hardware for attaching the bracket to a threaded rod is sold separately. The trapeze bracket comes in standard packages of one.

The FiberRunner QuikLock New Threaded Rod Bracket is used to support the 6x4 and 4x4 systems from any new threaded rod installation. It is secured to a threaded rod with two split nuts. It is used for a 0.5 inch threaded rod. The pre-assembled slide clamps enable fast assembly to the channel.

Provides secure, accessible route for cables spilling out from a vertical tee or spill-over junction to rack mounted equipment. Kit includes 6' length of 2x2 FiberRunner Hinged Channel H2X2BL6, 6' length of 2x2 snap-on hinged cover HC2BL6, four adjustable Z brackets FZBA1.5X4, one FiberRunner 2x2 End Cap FHDEC2X2BL, six hinged duct 2 wire retainers WR2H-C and all required mounting hardware. Attaches to 2x2 vertical tee exit or spill-over junction with a 2x2 exit with a 2x2 QuikLock Coupler FBC2X2BL. Also attaches directly to 4x4 or 6x4 vertical tee exits with low profile reducer FRLPR42BL.

The FiberRunner 3-Sided Trumpet Spillout is used in cable routing systems to limit the bend radius of the cable to 2 inches (50.8mm) when exiting from the 12x4 channel or horizontal tee.

The FiberRunner 3-Sided Trumpet Spillout is used in cable routing systems to limit the bend radius of the cable to 2 inches (50.8mm) when exiting from the 6x4 channel or horizontal tee.