The FiberRunner QuikLock Trapeze Bracket is used to support the 12x4 system by spanning two threaded rod drops that are 18 inches apart. It can be installed from above or below. It is used for a 0.5 inch threaded rod. The trapeze bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to the channel.

The FiberRunner Vertical Cable Manager Kit provides a secure, accessible route for cables spilling out from a vertical tee or spill-over junction. The kit includes a 4x4 channel, 4x4 snap-on hinged cover, 3 adjustable Z brackets, a 4x4 end cap, 1 adapter fitting, 6 hinged duct wire retainers, and mounting hardware.

The elevated trapeze bracket in black is 16.8 (426.7 mm) high, 40.3 (1023.6 mm) long, 3.4 (86.4 mm) wide, and 40.3 (1023 mm) deep. It is designed for use on a Net-Access N-Type or S-Type 42.1 (1070 mm) Cabinet that is elevated. The bracket comes in standard packages of one.

The Wyr-Grid Pathway Section protects cables between the Main Distribution Area and the Equipment Distribution Area. Unlike other pathways, it installs quickly and can be modified easily, optional sidewalls snap on without extra hardware or tools. Splice connector: WGSPL1218BL, Intersection splice: WGINTSPLBL, Steel, 118.4in x 8.5in x 2.1in (3007mm, 216mm, 53mm), Black powder coated.

The Wyr-Grid Strut Kit is used in cable routing systems to support the pathway on a standard strut channel. The strut kit allows Wyr-Grid Pathways to attach directly to standard 1.63 inch (41.44mm) wide strut structures. It measures 2.27 inches H x 6.50 inches L x 1.96 inches W (57.7mm x 165.1mm x 49.8mm). It contains one support member, two clips, and all hardware for assembly.

Straight splice connector with clips in black joins two 24"(610 mm) or 30" (762 mm) wide Wyr-Grid Pathways together. A bonded connection is possible with the black powder coated splice. In order to make the connection, the powder coat must be properly removed from the pathway surfaces that contact the zinc-plated clip on the back side of the splice. The package contains four components needed to join two pathway sections. Each package contains one straight splice connector.

The FiberRunner Vertical Cable Manager Kit provides a secure, accessible route for cables spilling out from a vertical tee or spill-over junction. The kit includes a 2x2 channel, 2x2 snap-on hinged cover, 4 adjustable Z brackets, a 2x2 end cap, 6 hinged duct wire retainers, and mounting hardware.

The Rubber Foam Tape is 1/32" X 1.5" X 72YD, for use with Surface Raceway

The FiberRunner 6x4 Vertical Tee Fitting attaches to a 6x4 channel and/or fitting to create a 90 vertical drop from a horizontal run. A hinged door is included. The vertical tee fitting requires a coupler to attach a trumpet or 3-port spillout to a vertical exit. It accepts the optional snap-on cover in conjunction with the channel.

The Acrylic Foam Tape is 1/32" X 1" X 7YD, for use with Surface Raceway

The FiberRunner QuikLock New Threaded Rod Bracket is used to support the 6x4 and 4x4 systems from any new threaded rod installation. It is secured to a threaded rod with two split nuts. It is used for a 0.625 inch threaded rod. The pre-assembled slide clamps enable fast assembly to the channel.

The Acrylic Foam tape, 1/32" x .50" x 72 YD, for use with Surface Raceway