4 Inch 20.5 Cubic Inch ENT non-metallic octagon ceiling box with 3/4 Inch knockouts.

Closure Strip, Length 10 Feet, Electro-Galvanized Steel

Joiner, Raceway, Length 7-1/4 Inches, Height 1-11/16 Inch, Electro-Galvanized Steel, For use with A Series Channel, with Seal

Closure Strip, Length 10 Feet, Pre-Galvanized Steel

Connector, Cast Conduit, Length 4 Inches, Electro-Galvanized Steel, To Connect 1/2 Inch or 3/4 Inch Conduit to Raceway Channel

Closure Strip, Length 10 Feet, Width 1-5/8 Inch, Color Gold, Material Plastic

The black powder coated bracket is 2.41" (61.2 mm) high, 28.5" (723.9 mm) long, 2.04" (51.8 mm) wide, and 28.5" (723.9 mm) deep. It is designed to support a 24" (609.6 mm) wide Wyr-Grid Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod drops. The hardware for attaching the bracket to a threaded rod is sold separately. The black powder coated bracket comes in standard packages of one.

The Wyr-Grid Trapeze Bracket is used in cable routing systems to support an 18 inch (457.2mm) wide Wyr-Grid Pathway using a pair of 0.5 inch (12mm) threaded rod drops. The bracket is 2.41 inches H x 21.0 inches L x 2.04 inches W (61.2mm x 533.4mm x 51.8mm). The hardware for attaching the bracket is sold separately. The Wyr-Grid Trapeze Bracket is sold in packages of one.

The FiberRunner New Threaded Rod Bracket is used to support the 2x2 and 4x4 FiberRunner Systems from new threaded rod installations. It is designed to be used for a 0.50 inch threaded rod. The new threaded rod bracket includes hardware to attach the threaded rod as well as hardware for mounting the channel to the bracket.

The FiberRunner QuikLock New Threaded Rod Bracket is used to support the 12x4 system from a new threaded rod installation. It is used for a 0.625 inch threaded rod. The pre-assembled slide clamps enable fast assembly to the channel.

The FiberRunner 4x4 Vertical Tee Fitting attaches to a 4x4 channel and/or fitting to create a 90 vertical drop from a horizontal run. A hinged door is included. The vertical tee fitting requires a coupler to attach a trumpet or 3-port spillout to a vertical exit. It accepts the optional snap-on cover in conjunction with the channel.

The FiberRunner 2 Port Spillout is used in cable routing systems to route into 1.5 inch (38mm) diameter split corrugated tubing directly through a hole cut in the sidewall of the 4x4 FiberRunner Channel or 4x4 Fiber-Duct Channel. It provides a 2 inch (50.8mm) bend radius control at the exit. It securely holds split corrugated tubing to ensure system integrity and easy access to add or remove cables.