The FiberRunner Channel T-Bolt Kit can be used for additional attachment when securing the FiberRunner Channel to mounting brackets.

The above floor raceway junction box is a fitting designed for use with the above floor raceway channel AFR4BCBL6. It is a double-gang box used to house any two combinations of outlets or switches. It is black.

The Strut Clip Kit allows the FiberRunner Channel or Wyr-Grid Pathway to be attached directly to a standard 1.625 inch W strut structure. The kit contains two clips the hardware for assembly.

Non-metallic square mud box with 4 inch. square ring, mounting feet and 12 integral connectors. 44.6 Cubic Inch Capacity.

The Rubber Foam Tape is 1/32" X 0.50" X 72YD, for use with Surface Raceway

The 3-sided vertical tee trumpet spillout fitting is used in cable routing systems to limit the bend radius of the cable to 2 inches (50.8mm) when exiting from a 4x4 or 6x4 FiberRunner Vertical Tee or 4x4 FiberRunner Fitting.

The Rubber Foam Tape is 1/32" X 0.50" X 7YD, for use with Surface Raceway

Elbow (L) Channel Joiner, 2-Way Right Angle, Material Cast Aluminum, For use with B-902 and G-955 Channel

4 inch. 30.3 cubic inch. ENT non-metallic outlet box with 1/2 inch. knockouts.

4 Inch 20.5 Cubic Inch ENT non-metallic octagon ceiling box with 1/2 Inch knockouts.

Steel Raceway Joiner with SilverGalv finish, reinforcing plate and nuts. For use with B series channel.

Closure Strip, Length 10 Feet, Width 1-5/8 Inch, Pre-Galvanized Steel